Wikiposts
Search
The Pacific: General Aviation & Questions The place for students, instructors and charter guys in Oz, NZ and the rest of Oceania.

Engine Rumour

Thread Tools
 
Search this Thread
 
Old 26th Oct 2015, 00:24
  #21 (permalink)  
 
Join Date: Jul 2001
Location: Australia
Posts: 4,955
Likes: 0
Received 1 Like on 1 Post
Folks,
Just to remind the man with the "light sabre" complex, US (at least) engine manufacturers do not publish TBO, they publish "recommended" TBO, a not very subtle difference.
As for FAA requirements (after all, the number of aircraft in the US makes for statistically significant data) see the regulations applying to type of operation, ie: Part 91, 125, 135 etc.
Tootle pip!!
LeadSled is offline  
Old 26th Oct 2015, 05:50
  #22 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
We do it every time we go flying.

And we know why you don't understand that.

And you're living in blissful ignorance, believing that stopping on-condition maintenance is going to stop someone taking you to court.
Lead Balloon is offline  
Old 26th Oct 2015, 05:55
  #23 (permalink)  
 
Join Date: May 2015
Location: Australia
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Lighten up obi. Anyone would think you were curing cancer or something!

Some people in this industry seriously have a severe case of figjam.

Running a spell check wouldn't hurt either.
Raptor090 is offline  
Old 26th Oct 2015, 06:34
  #24 (permalink)  
 
Join Date: Feb 2015
Location: Melbourne
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
obi_wan2015 clearly went to the same school as yr right. Or they're related. Or yr right has been reincarnated just like the original obi wan! I'm sure that ridiculous writing style is done deliberately to annoy everyone else. If so, its certainly working a treat with me..!
IFEZ is offline  
Old 26th Oct 2015, 07:13
  #25 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
Then don't do it.

Get it?

Just don't do it.

You'll feel better and we won't have to wade through your waffle to get to the important stuff.

And the really dumb thing is that you will be blissfully ignorant of your exposure when you fit that new engine in accordance with the manufacturer's recommendation. But clearly, blissful ignorance is your area of expertise.
Lead Balloon is offline  
Old 26th Oct 2015, 08:30
  #26 (permalink)  
 
Join Date: Jul 2005
Location: Queensland
Posts: 686
Likes: 0
Received 0 Likes on 0 Posts
I don't know why casa bothers about TBO's . When you think about it every engine flies 'on condition'. If a 1800 hr TBO engine chucks a con rod through the block at 50 hrs you don't just carry on for another 1,750 hrs because casa said it should be good for that time.

It all comes down to the mode of failure in high time engines. If impending failure gives plenty of warning then why not run them till you get tired of topping up the oil.

It appears that catastrophic failure is much more likely to occur early in an engine's life or as a result of maintenance errors than it is due to high time.

Even underutilized engines generally do not fail catastrophically. They simply wear out quicker than frequently used engines.

If casa wants to do something to help GA it would be better employed tuning up the suppliers of aviation parts and supplies. In my association with aviation I have survived the biggest fuel contamination scandal to occur anywhere in the world, TCM cylinders belling out the tops of their cylinders, Lycoming killing people with dodgy crankshafts, TCM neglecting to do adequate quality control resulting in a rash of improperly case hardened followers and thus ruined cam shafts. Now we have TCM selling new cylinders which don't seal properly brand new from the factory causing more expense as Aust engine rebuilders have to check all of them and reseat many. These are just problems that have affected me . There are plenty more.

All of the above list has cost operators collectively millions and what happened to the perpetrators ? nothing ? a slap on the face with a 3 day old lettuce leaf ? Not much that's for sure because every couple of years they manage to inflict some new expensive,dangerous blight on our industry.

Oversight of these companies by casa with half the enthusiasm they they have for trashing perfectly good engines would bring about a safer, more affordable and happier GA community.
rutan around is offline  
Old 26th Oct 2015, 19:17
  #27 (permalink)  
 
Join Date: Aug 2004
Location: moon
Posts: 3,564
Received 89 Likes on 32 Posts
Rutan around:

Oversight of these companies by casa with half the enthusiasm they they have for trashing perfectly good engines would bring about a safer, more affordable and happier GA community.
And think of all those lovely overseas conferences and fact finding missions such a policy would generate…...
Sunfish is offline  
Old 26th Oct 2015, 19:33
  #28 (permalink)  
 
Join Date: Nov 2007
Location: Mars
Posts: 373
Likes: 0
Received 0 Likes on 0 Posts
Where did 10 years rather than the Usual manufacturers' 12 come from?

Are CASA just trying to make sure we're really really really safe? Yes, I guess so. Pricing GA operators out of the industry for no particular safety benefit should be in their vision statement.
Clearedtoreenter is offline  
Old 26th Oct 2015, 22:56
  #29 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
You just don't get it, obi. But that's understandable: You have a very narrow experience that just happens to be repeated over and over.

Who is it that signs for and takes responsibility for the daily inspection? Not the engineer that signed the MR. As rutan around has pointed out, the fact that some LAME has signed an MR does not absolve the pilot from responsibility for spotting the loose spark plug lead, or that 9 quarts of oil had been added by the LAME without draining the old stuff and changing the oil filter, or the undercarriage circuit breaker that's pulled, or the ....

(When is it that pilots find the most things wrong with an aircraft? In that inspection and flight just after some LAME signed the MR.)

Who is it that has responsibility for the weight and balance calculations and loading distribution for the flight? Not the engineer that signed the MR.

Who is it that has responsibility for the fuel load and calculations? Not the engineer that signed the MR.

Who is that has responsibility for the landing and take-off distance and obstacle clearance calculations? Not the engineer that signed the MR.

Who is that has responsibility for reviewing and planning around the weather forecasts and NOTAMS? Not the engineer that signed the MR.

You're as bad as AVMED. You have this messianic belief that you and the manufacturer's recommendations and pieces of paper are the only bastions against aviation death and destruction. (Actually, you're worse, because you don't have the capacity to comprehend that you're at higher risk of liability when you 'sign out' a new engine than you are when you sign out one that's on condition.)

When the weather turns bad or a magneto fails because of some dodgy spark plugs fitted by some narrow-minded LAME who takes as gospel the propaganda produced by the manufacturer, believe me: That last thing pilots are reaching for and the last thing on which safety depends is your POS MR (or AVMED's POS medical certificate) and what they represent.

To add insult to injury, the owner will then have to pay to get the magneto fixed, so that the dodgy plugs can destroy that magneto as well. But who cares. It's "safe" because some LAME has signed an MR, in accordance with the manufacturer's propaganda.

Between that and privatisation of the airports, GA is all but dead. Well done, Australia!


Last edited by Lead Balloon; 26th Oct 2015 at 23:19.
Lead Balloon is offline  
Old 27th Oct 2015, 05:34
  #30 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
Yes.

I do it already.

I'd be happy to do it on any piston engined aircraft, provided:

- the engine/s is/are at least 500 hours old

- the engines/s was/were run over that period by a pilot who knows how to run piston engines (i.e. not someone full of old wive's tales)

- the engine/s is/are fitted with an all-cylinder engine monitor, and

- the engine/s hasn't/haven't been fiddled with by engineers who don't know what they're doing, or worse, engineers who think the recommendations in maintenance manuals are the product of deep analysis and review and revision in the light of objective data.
Lead Balloon is offline  
Old 27th Oct 2015, 05:35
  #31 (permalink)  
 
Join Date: Jul 2011
Location: nosar
Posts: 1,289
Received 25 Likes on 13 Posts
Would you sign a legal paper that you took all responsiblity for the release of an on-condition engine.
I would Yr Right, provided it was in good condition. The odds of it failing in the next 100 hours/year are small. If it does fail, the odds are it won't be catastrophic and the aircraft in question will make it to a suitable landing field. If it is catastrophic, the odds are that the pilot will make a reasonable forced landing and if the pilot blows the landing the odds are he will be relatively uninjured anyway.

Your paranoia of the legal system and litigation is pathetic, you should really change to a "safer" industry anyway. Office work perhaps? CASA even?

Get a life!
Aussie Bob is offline  
Old 27th Oct 2015, 05:43
  #32 (permalink)  
 
Join Date: May 2012
Location: Sydney
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
The bigger question here is, if yr right or obi wan is actually a LAME, how is it that his daylight hours are spent posting here and not working? Please delete this thread, it's burning my eyes.... ;L
Aviater is offline  
Old 27th Oct 2015, 05:49
  #33 (permalink)  
 
Join Date: Dec 2000
Location: Sydney NSW Australia
Posts: 3,051
Likes: 0
Received 0 Likes on 0 Posts
Yes, i do, every time i fly, and work with people that do, and have done for decades.. and not just piston engines..
Ultralights is offline  
Old 27th Oct 2015, 07:18
  #34 (permalink)  
 
Join Date: Jun 2014
Location: Toowoomba
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Before this goes any further, does anybody have a link to any official CASA documents that state where/when this is to happen?

If it does and the new Board and DAS let it happen we can write off Australian private GA and any hopes that anything would change with the new Board.
Eyrie is offline  
Old 27th Oct 2015, 08:07
  #35 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
If the new Board's and DAS's response to the CVD issue is anything to go by, I wouldn't be counting on too many decisions based on objective evidence and objective risk.
Lead Balloon is offline  
Old 27th Oct 2015, 09:07
  #36 (permalink)  
 
Join Date: Jul 2011
Location: nosar
Posts: 1,289
Received 25 Likes on 13 Posts
Before this goes any further, does anybody have a link to any official CASA documents that state where/when this is to happen?
Now that is asking a bit much Eyrie!

Just going back to Fujii's original post that started this thread:

A rumour at the airfield today that CASA is withdrawing engines on condition for those currently approved and going for ten year overhauls. Has anyone else heard this?
We have a rumour started on an airfield, then progressed to a pilots rumour network. If CASA want to bring in 10 year calendar overhauls, perhaps they started to rumour to gauge industry opinion. Looking at this thread and some of the opinions I am thinking they would get away with it.
Aussie Bob is offline  
Old 27th Oct 2015, 11:11
  #37 (permalink)  
 
Join Date: Mar 2005
Location: N/A
Posts: 5,934
Received 392 Likes on 207 Posts
Dripple dripple and more dripple
You know the guy that stated on this site that a rich mixture burns faster than a lean one
You might want to read up a little on the ignition process within the cylinder, and on flame front speed at various mixture strengths, and why the speed varies with mixture. Starting on the lean side, speed of the flame front increases with a richening mixture, reaches a peak at best power, and decreases as the mixture is further enriched. Of course at extreme lean and extreme rich there is no flame front, ergo no speed.
If I can't get that right what else is I failing in.
Corrected it for you.

I guess we can look forward to more dripple dripple and more dripple.
megan is offline  
Old 27th Oct 2015, 20:31
  #38 (permalink)  
 
Join Date: Aug 2004
Location: moon
Posts: 3,564
Received 89 Likes on 32 Posts
Obiwan reported as a reincarnation of the banned yr_right.
Sunfish is offline  
Old 27th Oct 2015, 20:48
  #39 (permalink)  
 
Join Date: Nov 2001
Location: Australia/India
Posts: 5,287
Received 419 Likes on 209 Posts
And an expert on my working hours and holiday arrangements! Is there anything that you don't know, obi? Anything?

I'll say it one more time for the one people that can't don't won't wish to understand: The probabilities of a piston engine you've 'signed out' failing catastrophically are higher on a new engine than one that's on condition. I realise you think you're not going to be taken to court in the former situation, but you'd be rong.
Lead Balloon is offline  
Old 27th Oct 2015, 23:46
  #40 (permalink)  
Moderator
 
Join Date: Jan 1996
Location: Utopia
Posts: 7,423
Received 202 Likes on 113 Posts
Obi, please don't confirm my opinion that you are a troll!!
tail wheel is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.