alexb757:
Runway incursions do happen, they are rare. Having said that, there is always a reason for them and until we know what happened here, its speculation. Fortunately, none have never come to a fatal conclusion at LAX (at least that I am aware of), which would be more likely during low-visibility conditions. |
why do aviation experts think that the biggest risks when talkng about runway excursions are aircraft ones !. Well they are not its the amount of vehicles and drivers without proper training and technology available to them that are the biggest risk. The major airports have around 30 at any one time that are able to free range around an airfield. Carrying out various tasks.
There is technology out there and I just dont mean having transponders on vehicles which in effect only help ATC and do not stop runway incursions. And what ATC controller in their right mind would want 30 transponders from vehicles cluttering up his screen at once when he is supposed to be controlling aircraft ? The technology involves a visual airfield map so that the driver is always aware of his position and the runways are ring-fenced so that an audible alarm goes off in the vehicle. Having experience of 25 years in Ops I have dealt with vehicles involved in runway incursions and some are from experienced staff of ground handling companies or contractors. (not airside Ops) there is also technology with infrastructure and the way stop bars are operated. there is a currently a trial at Aberdeen with a second set of lights that will illuminate if the first set is driven over. Still technically an incursion but it stops the aircraft/vehicle from infringing the actual runway. This I believe is all down to cost and the unwillingness of airports to have this technology in all vehicles capable oif driving on the manoeuvring area. Well one day it will come back to bite them on the backside. |
Southern duel: I'm not sure where you're getting your info from or which particular airport(s) you are describing?
At my airport LAS, nobody and I mean nobody, is permitted to drive " free range" - least of all ground handlers. We have very strict rules and if you refer to my previous, you will see that there is an entirely different set of tests/exams and also privileges between "ramp" drivers on the non-movement service roads and anyone that is authorized to be anywhere near a runway! Another point, no aircraft engineer, mechanic or airline manager is allowed beyond the ramp area without being escorted by airport ops personnel. I have not heard aviation experts say that incursions are either solely or mainly aircraft. Yes, pilots make mistakes as well as drivers. Again, we don't know what this person was doing out there. All we know is that it was a LAWA employee. As for alarms, yes, we have them as well and they go off according to your approach speed and angle approaching the hold bar. In addition, we also have RWSL as another layer and at two hotspots, an RGL as well. And so do a lot of airports. And like LAX, we have 4 runways of which 3 intersect....:eek: |
Originally Posted by alexb757
(Post 9151856)
Southern duel: I'm not sure where you're getting your info from or which particular airport(s) you are describing?
At my airport LAS, nobody and I mean nobody, is permitted to drive " free range" - least of all ground handlers. We have very strict rules and if you refer to my previous, you will see that there is an entirely different set of tests/exams and also privileges between "ramp" drivers on the non-movement service roads and anyone that is authorized to be anywhere near a runway! Another point, no aircraft engineer, mechanic or airline manager is allowed beyond the ramp area without being escorted by airport ops personnel. I have not heard aviation experts say that incursions are either solely or mainly aircraft. Yes, pilots make mistakes as well as drivers. Again, we don't know what this person was doing out there. All we know is that it was a LAWA employee. As for alarms, yes, we have them as well and they go off according to your approach speed and angle approaching the hold bar. In addition, we also have RWSL as another layer and at two hotspots, an RGL as well. And so do a lot of airports. And like LAX, we have 4 runways of which 3 intersect....:eek: Yes they all have training and are competent however human factors comes into it and all I was suggesting is that airports can do more and not worry about the finances for a change |
At PQI, a number of years ago, a Northeast DC-9 narrowly missed a snowmobiler during landing on a snow covered runway at night. The copilot saw him pass under the right wing just as they were rolling through the cross runway intersection.
|
snowmobiler?
What was that person doing on the movement area/runway? What happened to security? Challenging suspicious or unbadged personnel? :confused: |
Southern, if that is the case, maybe I should come over and reorganize that place. If what you describe is really happening, the whole airside division needs revamping!
First off, none of the people you mention should be out there in the first place on their own! Also, you need a dedicated escort division who's primary task is to escort contractors, police, ambulance and anyone else that does not have airport authority to be in the movement area. These persons drive dedicated vehicles with required logos and lights and are also in direct contact with ATC. And yes, even security personnel. In essence, you NEED to have a reason to be out there on a daily basis and if your duties don't require you to be, then you are not authorized to be on even a taxiway, let alone a runway, period. Your described airport seems to be very lax with regards to who goes where and is an accident waiting to happen. I agree airports need to do more to prevent incursions. So, I have to ask, what are all these people doing out in the movement area? Do they NEED to be there? Have they passed an airport driving test? Do they know how to operate and speak on the radio? You would dramatically cut down the risk factor if they were kept to service roads on the ramp area only, nowhere else. With regard to airfield mx, tech ops, electricians etc. at my airport, they are all trained, have radios, required badges. However, even they MUST call ops first requesting permission to go out to the movement area and also call ATC. No runway crossings! Most mx is done at night between 0200 and 0530L when one runway at a time is closed and minimal aircraft operations. Airport Ops closes and opens runways on the radio with tower, not ATC. If you have a well-organized and trained team with everyone knowing what they need to do, you greatly mitigate the chances of runway incursions. If you let folks drive around "free range" with little control, I'm not in the least surprised on the frequency of incidents. I'd be happy to offer a few more pointers! |
Originally Posted by wanabee777
At PQI, a number of years ago, a Northeast DC-9 narrowly missed a snowmobiler during landing on a snow covered runway at night. The copilot saw him pass under the right wing just as they were rolling through the cross runway intersection.
Originally Posted by alexb757
snowmobiler?
What was that person doing on the movement area/runway? What happened to security? Challenging suspicious or unbadged personnel? :confused: The snowmobilers used to get drunk and race each other on the short runway (10/28), especially late at night.:E Not much else to do during the wintah in Northern Maine for entertainment.:) |
Well, thank goodness it's very different today! That's why we have much less runway incursions. Take appropriate action, tighten up the ship and it will yield results.
|
One night LIZ tower sent me around for a moose on the runway.:uhoh:
|
Your airports need fences and regular patrols! :p
|
KLIZ was a SAC base which had B-52's cocked on nuclear alert and ready to launch with a few minutes warning.
Even with all it's security, they couldn't keep a wayward bull moose from wandering onto the runway. It happened on more than one occasion.:\ |
KLIZ was a SAC base which had B-52's cocked on nuclear alert and ready to launch with a few minutes warning. Even with all it's security, they couldn't keep a wayward bull moose from wandering onto the runway. It happened on more than one occasion. Turned out to be a couple of drunk guys with rifles who thought that a nuclear weapons facility grounds might be a good place to hunt deer. :eek: Back on topic, in the 1980s an Ozark DC-9 crashed into a snow plow while landing at Sioux Falls, separating the right wing and igniting a fireball. The snow plow operator was killed but miraculously all crew and passengers escaped with minor injuries. The probable cause was inadequate ATC service. |
If you've ever been an airfield driver at LAX, you'll understand. The entire industry is in a race to the bottom and lowly airport workers are placed at the leading edge. The customer has spoken and this is what they are willing to pay for. Competency and quality don't matter as long as the illusion of being served and cared for is maintained to a minimally acceptable level. That level is determined by society at large more than by people who know what they're talking about. The film "Idiocrasy" aptly describes the condition we are rapidly approaching! :)
Really though, no amount of electronic technology will ever replace individual competency and sense of responsibility. While these technological aids may be of considerable assistance to the attentive and competent, it's doubtful that the performance of those individuals representing the lowest common denominator will be improved substantially. When typical pay for the majority of airfield drivers is near minimum wage, the lowest is exactly what you get. The better workers leave for better jobs at Mickey D's until they can get a job with the postal service or other government job. At least Joe Public gets Cheap tickets and record airline profits (and CEO bonuses) are realized though. So we've got that going for us... Be careful and hope for the best!:ok: |
All times are GMT. The time now is 16:10. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.