Done that, strangely enough as a 72 Sqn cab
https://forum.largescaleplanes.com/i...thern-ireland/

https://www.britmodeller.com/forums/...pmg-and-mount/

note the little rubber bump stops above the doors were also red, they were for the cowling to rest on when you were working on the engines. Also the hydraulic connections on the port side aft of the door were I think Red too.

Nutty, that's a yes for the Hyd covers.

CG

Here’s a snippet at the moment. Still plenty to do

Just remember that there's no requirement to display the boxes of 1B1T with the lids open...

cheers. I’ve actually painted the underside of the cowling rests, so will now paint the whole thing.

You realise it's much too clean to be an actual representation!:E

CG

Yes:=, it’s not done yet. I’ve got the final weathering to do when it’s done so no more handling the kit. I’m in two minds as to whether to scratchbuild the Nightsun just to add more detail. Then the pole it’s going to be mounted on, I’m inclined to go with a carbon item this time rather than the go to acrylic/brass tube.

Seen these

Aerospatiale SA330 Puma Walkaround Gallery

yeah cheers NL, this one has been a great source of basic info. I’m sure I put thousands to the sites viewing figures over the last 1.5 years. Crazy to think I started this model on the 19 Apr 20. I’ve got a full build log (if you haven’t found it) which I’ll link when it’s completed.

CAA audit in work this week, so time to get the iPad out and wait for knock on the door:cool:

Good luck, just finished getting our new approvals sorted after 2 years of writing servicing schedules and the Expo to find it kept changing resulting in starting again. :(