Go Back  PPRuNe Forums > Aircrew Forums > Military Aviation
Reload this Page >

Boeing C-17 - ground refuel time

Wikiposts
Search
Military Aviation A forum for the professionals who fly military hardware. Also for the backroom boys and girls who support the flying and maintain the equipment, and without whom nothing would ever leave the ground. All armies, navies and air forces of the world equally welcome here.

Boeing C-17 - ground refuel time

Thread Tools
 
Search this Thread
 
Old 22nd Mar 2011, 15:39
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 2011
Location: london
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Boeing C-17 - ground refuel time

Doing some research for a tv production and need to find out what the refuelling time from scratch to full tank is?

Or if anyone knows what the refuel rate from a tanker is?

I calculate that the c-17 has a fuel capacity of 90 tones or 29,500 gallons. The refuel rate on a commercial plane is 1 minute per tonne, but I doubt it takes 90minutes to refuel...?

Would be great if someone could give me an answer.

Thanks


Simon
natternoise is offline  
Old 22nd Mar 2011, 15:50
  #2 (permalink)  
 
Join Date: Jul 2007
Location: Germany
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Your questions would be best directed to Corporate Comms at RAF Brize Norton.

One point worth noting, nothing gets service personnel groaning louder than incorrect or non-factual details in documentaries and even tv programmes.

Last edited by VinRouge; 22nd Mar 2011 at 16:00.
VinRouge is offline  
Old 22nd Mar 2011, 16:35
  #3 (permalink)  
 
Join Date: May 2008
Location: gloucester
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Depends on the pressure of the supply!!
but a good guestimate....a USAF fuel truck load..20mins
collbar is offline  
Old 22nd Mar 2011, 16:44
  #4 (permalink)  
 
Join Date: Apr 2005
Location: Temporarily missing from the Joe Louis Arena
Posts: 2,131
Received 27 Likes on 16 Posts
Depends on the pressure of the supply!!
An HEPC cuts out at 55PSI.

Ramp it up all you want but thats often your choke point.
The Helpful Stacker is offline  
Old 22nd Mar 2011, 17:00
  #5 (permalink)  
 
Join Date: May 2008
Location: gloucester
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
True, just my point...... in the US many base supplys are restricted to 30psi or less, some bases will only allow one truck at a time... get a fueller spot at vegas and your laughing.
collbar is offline  
Old 22nd Mar 2011, 17:00
  #6 (permalink)  
 
Join Date: Feb 2002
Location: Northants
Posts: 692
Likes: 0
Received 1 Like on 1 Post
The refuel rate on a commercial plane is 1 minute per tonne
Don't think so - if it was a 747 taking on 140T would never make the turnround!
Flap62 is offline  
Old 22nd Mar 2011, 17:02
  #7 (permalink)  
 
Join Date: Oct 2005
Location: Closer than you think...
Age: 65
Posts: 390
Received 0 Likes on 0 Posts
Flame me if you want, but I would have thought along the lines of if you need to know then you would already know. If ya don't then quite obviously you don't need to....
Always a Sapper is offline  
Old 22nd Mar 2011, 17:47
  #8 (permalink)  
 
Join Date: Apr 2005
Location: Temporarily missing from the Joe Louis Arena
Posts: 2,131
Received 27 Likes on 16 Posts
........if you need to know then you would already know. If ya don't then quite obviously you don't need to....
Hmmm, I can see the nature/nuture debate coming along.
The Helpful Stacker is offline  
Old 22nd Mar 2011, 18:06
  #9 (permalink)  
Thread Starter
 
Join Date: Mar 2011
Location: london
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the responses!

How does the PSI relate to litres or gallons per minute.

Is there a shorthand way of calculating the time it'll take to refil? I just need to be in the ballpark.

Thanks,

Simon
natternoise is offline  
Old 22nd Mar 2011, 18:42
  #10 (permalink)  
 
Join Date: Apr 2008
Location: USA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I agree with Always a Sapper. I see big red flags waving here.
cat3autoland is offline  
Old 22nd Mar 2011, 18:47
  #11 (permalink)  
 
Join Date: Oct 2004
Location: Hunched over a keyboard
Posts: 1,193
Likes: 0
Received 0 Likes on 0 Posts
I'm not giving away any secrets if I say that my (slightly) hazy memory says that we could refuel a VC10 in under half an hour - 69 tons max fuel load, often taking a fill up of over 60tons.

Certainly much better than 1 ton per minute.
moggiee is offline  
Old 22nd Mar 2011, 18:54
  #12 (permalink)  
 
Join Date: Mar 2005
Location: Kammbronn
Posts: 2,122
Received 3 Likes on 3 Posts
Given that a) the data clearly isn't in the public domain; and b) there are a number of variables, the solution is pretty obvious.

Cuff-it. After all, who's going to say you're wrong?
diginagain is offline  
Old 22nd Mar 2011, 19:47
  #13 (permalink)  
 
Join Date: Sep 2005
Location: england
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Some people make me laugh! Really, is fuel uplift rate such a big secret? ... Give Boeing a ring, I am sure they will be more than happy to fill you in on the details

Stacker, a Herc doesn't "cut out" at 55psi, it is limited to 60Psi to prevent damage to the refuel pipes & seals etc
Kengineer-130 is offline  
Old 22nd Mar 2011, 20:08
  #14 (permalink)  
 
Join Date: Jan 2008
Location: Australia - South of where I'd like to be !
Age: 59
Posts: 4,261
Likes: 0
Received 0 Likes on 0 Posts
Interesting that Boeing or the Airforce don't list much or anything about fuel capacity et al on the web pages re the C-17. In a quick search only Wiki.



Anyway, am I seeing things or is it April 1st ?

http://www.pprune.org/military-aircr...ions-time.html

It's under a different log on name but ..........


Lockheed C-130- ground loading of rations time
Doing some research for a tv production and need to find out what the restocking of rations time from scratch to full cupboards is?

Or if anyone knows what the restock rate from a rations truck is?

I calculate that the c-130 has a food capacity of 10 tones or 29,500 pies. The restock rate on a commercial plane is 1 minute per pie,
but I doubt it takes 90minutes to restock...?"
500N is offline  
Old 22nd Mar 2011, 20:11
  #15 (permalink)  
 
Join Date: Apr 2005
Location: UK
Posts: 2,164
Received 46 Likes on 22 Posts
I guess Stacker was talking HEPC = Hose End Pressure Controller... no mention of Hercules...
Just This Once... is offline  
Old 22nd Mar 2011, 21:45
  #16 (permalink)  
 
Join Date: Apr 2008
Location: USA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
"Some people make me laugh!"

Glad you got some enjoyment out of it but given the current events going on in the world, requests for odd info should make one wonder a bit.

A guy walks up to a young airman waiting outside an airport terminal and casually asks if he is going somewhere in the desert. Easy question, how much harm can come from it, right?

Well, I went to the memorial service for one of those airmen and it was pretty
rough to see his buddies all torn up and the empty boots on display with the rifle and helmet and photo.

So yes, maybe it's paranoia on my part but why in the world would somebody need to know how long it takes to upload fuel or load a military cargo plane? It doesn't add up. If someone was doing a legitimate documentary, I'm sure the military would be more than helpful in answering such questions....
cat3autoland is offline  
Old 22nd Mar 2011, 21:51
  #17 (permalink)  
 
Join Date: May 2009
Location: UK
Age: 41
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
First link on google:

Commercial:
http://www.fluid-transfer.co.uk/downloads/ft_razer.pdf
Flow rates matched to aircraft fuelling rate and capacity
Deck hose - to 1500 lpm
Reel hose - to 1000 lpm
(Based on a hydrant pressure of 8.6 bar 
and a test rig back pressure of 2.1 bar).

(Ballpark you needed)

Military
No values but:
http://www.fluid-transfer.co.uk/down...20Brochure.pdf

'Meters'
Range of bulk flow positive displacement meters, 200-4166 lpm.

More:
Aircraft Refueling, Refueling Vehicles, Refueling Components
40000l Refueller

Low profile refueller suitable for fuelling aircraft from Airbus A320 to A380 at flow rates up to 3000lpm.
Fuelling rates
Reel hose: 1000 lpm through 2" hose.
Deck hose: 3000 lpm through two 2½" hoses
Overwing reel hose: 300 lpm through 1½" hose



Combine the above with the fact that the meter in the military one is up to 4000lpm you have a ballpark for fuel rate through hoses. How many hoses and how many refuelers is another question.

EDIT: If the guy asking is not legitimate he is defenitely not very smart. The above info are on the internet and I'm pretty sure if one looks can find better data for documentary that are not sensitive.
Dimitris is offline  
Old 22nd Mar 2011, 22:28
  #18 (permalink)  
 
Join Date: May 1999
Location: Quite near 'An aerodrome somewhere in England'
Posts: 26,795
Received 270 Likes on 109 Posts
How long to refuel and turn one of HM's jets en-route?

Easy: Landing time to take-off time = (Ground meal allowance time) - (2 x taxying time).

So about 2:40 back in the 1990s before the beancounters cottoned-on....

Ching!!
BEagle is online now  
Old 22nd Mar 2011, 22:53
  #19 (permalink)  
Thread Starter
 
Join Date: Mar 2011
Location: london
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks to those of you who helped answer my question.

Never thought it'd make folks jittery, but I understand why.

& Demitris, "not very smart"...c'mon, maybe "just lazy"

Thanks again,


Simon
natternoise is offline  
Old 22nd Mar 2011, 23:28
  #20 (permalink)  
 
Join Date: Dec 2000
Location: Horsham, England, UK. ---o--O--o---
Posts: 1,185
Received 4 Likes on 2 Posts
Arrow

natternoise

What makes you think that the tanks have to be full? Aircraft are not like cars. You only put in as much fuel as you need for the planned flight plus contingency and diversion fuel required. If you filled them up every trip you would limit the payload you could carry!
Out Of Trim is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.