Go Back  PPRuNe Forums > Aircrew Forums > Flying Instructors & Examiners
Reload this Page >

Course Completion Certificate

Flying Instructors & Examiners A place for instructors to communicate with one another because some of them get a bit tired of the attitude that instructing is the lowest form of aviation, as seems to prevail on some of the other forums!

Course Completion Certificate

Old 20th Sep 2022, 05:41
  #1 (permalink)  
VB
Thread Starter
 
Join Date: Aug 1998
Location: UK
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Course Completion Certificate

I understand that an instructor can sign the CCC in accordance with FCL740 if the rating expired no more than three years before and the rating concerned a non-high-performance single-engine piston class rating or a TMG class rating. However in the case of an applicant who does not require refresher training because the rating has expired by less than three months or he is the holder of a current rating on another licence eg. FAA , can the instructor/examiner sign the CCC stating training not required or does it have to be done by an ATO or DTO ?
VB is offline  
Old 20th Sep 2022, 11:14
  #2 (permalink)  
 
Join Date: Oct 2017
Location: Bressuire
Posts: 823
Likes: 0
Received 12 Likes on 9 Posts
The HOD/CFI must sign to confirm the completion of a course of training when that has been required. An Instructor may sign the rating section of the licence when the rating (not the licence!) has not expired but is being revalidated. The circumstance however is limited to the occasion of the instructor completing the training element but only if at the same time this completes all the experience required to revalidate.
Fl1ingfrog is online now  
Old 20th Sep 2022, 16:58
  #3 (permalink)  
 
Join Date: Oct 2004
Location: UK
Posts: 6,580
Likes: 0
Received 3 Likes on 3 Posts
VB
You are referring to COMMISSION IMPLEMENTING REGULATION (EU) 2019/1747 of 15 October 2019 amending ‘FCL.740 Validity and renewal of class and type ratings to:

(b) Renewal
For the renewal of a class or type rating the applicant shall comply with all of the following:
(1) complete a proficiency check in accordance with Appendix 9 to this Annex (2) prior to the proficiency check referred to in point (1), complete a refresher training
(ii) at a DTO, at an ATO or with an instructor, if the rating expired no more than three years before and the rating concerned a non-high-performance single-engine piston class rating or a TMG class rating.
In which case, the only person who can sign the CCC is the instructor who gave the training.
Whopity is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.