PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Flight Testing (https://www.pprune.org/flight-testing-50/)
-   -   Don Wylie of Texas Air Aces (https://www.pprune.org/flight-testing/110196-don-wylie-texas-air-aces.html)

TheShadow 26th Nov 2003 12:30

Don Wylie of Texas Air Aces
 
Don Wylie of Texas Air Aces was killed Nov. 19 when the wing separated from his trainer aircraft in flight (he was going through an advanced maneuver demonstration for a potential client at the time). I'd flown with him for some upset recovery training a few years ago. The airplane was a T-34 piston. The wing separated at 7,000 ft., and Wylie and his client apparently attempted to bail out. One body reportedly was found wrapped in a fouled chute. There is an AD out restricting manueuvering loads (fatique cracking). This airplane was due to have its wing spar replaced in the next 60 days (terminating action per the AD, I think). NTSB is all over the case.

I am told that the T34 Mentor had a bit of a history of mainplane failure both in service and as a warbird - as well as in its civilian guise.

Can anybody provide (or point me towards) some data?

[email protected] will get me.

Wunper 26th Nov 2003 23:21

The Shadow

There's a pretty informed line in this article on Avweb

http://www.avweb.com/news/columns/182086-1.html

if you email John Deakin he might have some later info for you all his articles are well worth reading.

Wunper:ok:

safetypee 29th Nov 2003 02:51

A sad day,
 
I met Don for the first time and sat with him throughout last years Honeywell Safety Conference. He gave an excellent paper on upset maneuver recovery based on his flight training school.

I quote from the audio track from an on board video which showed his airmanship and flight handling skills in dealing with an engine failure and forced landing. At touch down the comment was:

"(callsign) to ground. People, here I am."


All times are GMT. The time now is 14:03.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.