PPRuNe Forums - Converting to Jar 66 from Canada AME

PPRuNe Forums (https://www.pprune.org/)

- Engineers & Technicians (https://www.pprune.org/engineers-technicians-22/)

- - Converting to Jar 66 from Canada AME (https://www.pprune.org/engineers-technicians/91441-converting-jar-66-canada-ame.html)

A320doctor

29th May 2003 17:30

Converting to Jar 66 from Canada AME

Can anyone tell me if the Canadian AME is accepted at face value or is there a process that has to take place. So far my understanding is that all I have to do is work in the EU for 6 months and then write air regs. Can anyone confirm this for me and if you have done this, let me know how it went and how to do it. I currently hold a Transport Canada AME licence,M2.
And what is B1 and B2 stand for? Thanks for the input.

doc :confused:

spannersatcx

29th May 2003 17:42

Ask the CAA is your best bet.

B1 mechanical B2 avionics

sump oil

29th May 2003 20:16

No, you will get no exemptions and your type course wont be reconised either, you will have to do the lot, have a look at the airmech forum for more info.

B1 is engine, airframe and electrical

B2 is avionics

The JAR system is not like the canadian system where a CAT 1 and certify for a CAT 38 job, but under this system a CAT 38 can release the A/C.

sump oil

All times are GMT. The time now is 21:42.