BluFin, that's great for base maintenance, this guy is on the line, fuel tank entry is not normally done on the line!

Spanners

That has caused some interest, especially in one organisation where they specifically require LED torches to be used for their good lighting properties.

Could you please elaborate on the reason why the organisation says that LED light sources make crack detection difficult? We can't think of any!

I can't remember exactly, it was something to do with the colour and intensity of light emitted.

Spanners quite right you never get a line engineer within 50 foot an Aircraft during fueling. They are normally watching TV in the crew room

If the OP is based where I think he is, then he needs to take account of the new rules that come in to effect from the 10th Sep regarding tooling and 'security'. :eek:

Re torches. My current employer has banned the use of all personal torches throughout the engineering department and has stipulated an expensive, rechargeable unit that weighs a ton and would give the Lighthouse at Alexandria a run for it's money. The ruling applies to line & hangar.

As long as you have ToT on your pass you're ok!

Nope, you need to have all your tools either in close proximity or locked in a secure place. EG back of a van. Trouble is CAA rules state that the van must be left open and the keys in the ignition, which I reckon means the back of the van is not a 'secure' place.

You can't make this up. :ok:

I just rely on these....
Much cheaper than batteries and ideal for looking for fuel leaks!:ooh:

http://www.vtpipes.com/images/requis...atchesfull.jpg

Yeah Banana, did you check out the sticker price??? $1499.99

A good place to buy Torches and other bits and pieces
is Deal Extreme Cool Gadgets at the Right Price - Worldwide Free Shipping - DealExtreme

Read the reviews first before buying, good products stand out
and Most of them have reviews written by people who know
what they are talking about. The products are often the same as
other branded products in the marketplace.

.

Spanners,
Not sure why a LED torch would not be suitable for seeing cracks.

When I got my Led Lenser P7 a couple of years ago, I was selling a car and a guy came to look at it just as it was getting dark. I put the light on outside my garage but this only lit one side of the car so I got out the P7. This showed every little scratch in the paint to the extent it looked as though it had been wire wooled all over. Mind you he still bought it. (Welsh)

So I would think it would be ok looking for cracks.

2H or HB what would you recomend
 

Sorry could not resist..... hfr

Maplins do a Refrakta torch. It takes 1 AA cell, has variable brightness and focus. Its tough, I've dropped mine plenty of times. Being able to dim it is very usefull for close work. It's also small.

As it is for line work, will not discuss fuel tank torches . The Mag-Lite 2xD or 3xD cell is my favourite, Reasons: aluminium body, focus, sealed and almost Skydrol proof. But then I am old fashioned.

The classic Mag was a pain in the butt, the switch cover is sure to fall out within a few weeks and within about a year they develop contact issued, can't count the times I have had to smack mine on the bottom to get it to light up. Only reason I owned one because it was the only light bright enough and available at the time. A.M.3, I am happy you have had a better experience than I have.

Cheers for the replies guys.

Finished my 4 shifts today, so im back home and just picked up my new torch, its pretty good, easily lights up the tree 200ft from my house.

But was it worth the £30? I'll have to wait until my next night shift, next week to find out.

Overall its a nice torch, my only gripe with it, is switching between the 154 Lumen output, and the 45 Lumen output, its not a case of clicking the switch a couple of times, you have to twist a few parts, which are pretty stiff, granted its brand new, bit of a pain to do if your hands are sweaty.


One more question, where can i get one of these can openers in the UK?

http://abrahamdist.com/wp-content/th...rcanopener.jpg

led lenser p7, good for line mx
and also looking for this can opener, but in france

Carried a can opener for a few years, became skillful with a quick jab and twist from my leatherman to pour and a stab 180 out for air. I actually had an old school spout for a while.

Liney surely an oxymoron

The only advancement i have made on that can opener is that its a 'church key can opener' I can find them for sale in the US, but not the UK.