Licensed Engineer
 

I'm just about to go for my company approval with my first type and have been asked to research several areas concerned with quality issues and company procedures. An area I am struggling with is a clear concise statement regarding licensed engineers certification privilages. I'm not totally sure what our quality manager is after and I don't want to go in and waffle.

Any help appreciated.

Your Part 145 MOE shouild provide the answers you need, and you're meant to know what's in it as part of holding an authorisation.

I know what I'm responsible for but what I was after was a short definitive answer, which I think I've now found after following a note I'd made in my M10 book.

66.A.20 Privileges
(a) Subject to compliance with paragraph (b), the following privileges shall
apply:
1. A category A aircraft maintenance licence permits the holder to issue
certificates of release to service following minor scheduled line maintenance and simple defect rectification within the limits of tasks specifically endorsed on the authorisation. The certification privileges shall be
restricted to work that the licence holder has personally performed in a
Part-145 organisation.
2. A category B1 aircraft maintenance licence shall permit the holder to
issue certificates of release to service following maintenance, including
aircraft structure, powerplant and mechanical and electrical systems.
Replacement of avionic line replaceable units, requiring simple tests to
prove their serviceability, shall also be included in the privileges.
Category B1 shall automatically include the appropriate A subcategory.

(b) The holder of an aircraft maintenance licence may not exercise certification
privileges unless:
1. in compliance with the applicable requirements of Part-M and/or Part-145.