Avionics Enginnering and licensing. Moving to Oz
 

Hey guys,

I'm studying electronics BEng at Liverpool Uni and I'm really interested in specialising in Avionics.

The problem is that I intend on emigrating to either Australia or California after my degree and wondered if someone could give me advice about the licensing structure?

If, after my degree, I work in the UK towards JAR licensing does that count towards an Australian or FAA qualifications? I know flight deck need to resit exams but is that the case for Engineers too?

If anyone can point me in the right direction I'd be really grateful.

Thanks,

Scott

Option 1
Currently FAA A&P licence holders need to apply for a Category Technical Competency assessment (CTC) which evolves examinations you will need to supply copies of your licence and approvals detailing the release to service privileges please refer to the following link for CTC http://www.casa.gov.au/ame/download/ctc_215b.pdf http://www.casa.gov.au/manuals/regulate/ame/form346.pdf
AME Examinations - Types of AME Examinations http://www.casa.gov.au/ame/download/eir_211s.pdf This would give you a CAR 31 licence outcome

Option 2
You state in you email that you are currently progressing your EASA qualifications another option is to gain an EASA licence issued by either UKCAA, France, Italy, Germany or Netherlands. Once you have your licence along with company approvals linked to the EASA licence showing that you have been releasing to service the aircraft for a period of 6 months you could be eligible for a Licensing Technical Assessment (LTA) if all the paperwork is acceptable we would recognise your EASA licence along with your company approvals for issue of an Australian licences you would be only required to sit the Airworthiness Administration (AA) examination. This would give you a CAR 31 licence outcome

Option 3
With or without an EASA licence you can apply to a Registered Organisation (RO) for Recognition of prior learning (RPL) they would assess your qualifications and training for the issue of a CAO 100.66 Maintenance Authority which a a later date can be converted into a Australian Part 66 B1 or B2 licence when the new regulations are made early in 2009 be aware that any short falls found during the RPL process will have to be completed prior to licence issue. RPL is carried out by the the following companies at the present time.

Aviation Australia in Brisbane Aviation Australia

Padstow TAFE in Sydney Raine Rd Padstow, NSW 2211 (02) 9722 5399 https://www.tafensw.edu.au/

Kangan Batman TAFE in Melbourne Kangan Batman TAFE

CASA : [email protected]
Maintenance Personnel Licensing
Personnel Licensing, Education & Training Group
Civil Aviation Safety Authority
Ph. 02 62171678
Fax. 02 6217 1401

Hope this helps

BAe146??? :{:{:{