Pitot and Static Blank Procedures??
 

Hi all

currently learning aircraft maintenance and recently had coursework that involved the fitting of pitot/static blanks to an aircraft and needed to reference the procedures back to the Aircraft Maintenance Manual, Just want to verify that it would be in chapter twelve ("services" I think) of the AMM.
After much looking in Chapter 12 at the college I still haven't found it. Any Ideas?
Other information:
the procedures are for a Beechcraft Premair 1 (I think)

Cheers
AeroMad

p.s Apologies if I have posted in the wrong area.

CHAPTER 10 - PARKING AND MOORING :ok:

Was two chapters off :O
Back to the AMM for me

Cheers for the help :ok:

AeroMad

You should also take a look in CAA CAP 562 as the CAA published advice on this subject following a fatal accident due to poor maintenance practices regarding pitot head and static blanking covers.

The link is below and you will find the information in Part 11, leaflet 11-22, appendix 10-1 :ok:

www.caa.co.uk/docs/33/CAP562.PDF

Cheers for the link.
Much appriciated.

AeroMad