PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Engineers & Technicians (https://www.pprune.org/engineers-technicians-22/)
-   -   GPU..how much power KVA needed ?? (https://www.pprune.org/engineers-technicians/211255-gpu-how-much-power-kva-needed.html)

cressidom 15th February 2006 08:43

GPU..how much power KVA needed ??
 
Hallo people..

looking at getting a used GPU for a corporate / FBO type ops..and wanted advise on the type of power needed. It needs be able to handle Corp.type jets..and 737F..DC-10 etc. Is there a unit type that can handle both ? or would i need to get 1 of each for the different type jets.
Will 90 KVA suffice for a 737 ?

Cheers

Swedish Steve 15th February 2006 19:11


Originally Posted by cressidom
Hallo people..
Will 90 KVA suffice for a 737 ?
Cheers

Yes, using 90kva GPU only a problem when you get up to B777 or B744, and then it can be managed. i.e. no hyd pumps or fuel pumps or ovens, and 90kva is OK.
But I saw a picture of an A380 with four GPU!

Bertrude 15th March 2006 21:51

GPU Selection
 
Guys,

Interesting thread - I'm going through a similar problem. I can see the sense in limiting activity to low power requirements. However, suerly if its not power matched properly the GPU could cause damage to the aircraft in an undervolt situation - notwithstanding sensitivity of the aircraft protection system. Grateful for any thoughts.

Regards,

Bertrude

Sometimes you fish and sometimes you mend the nets!


All times are GMT. The time now is 18:48.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.