Why are we so courteous??
 

Having read most of the threads where flight deck are the main contributors,( rumours and news etc) Why is there so much agression and insulting of fellow aviators. Compared to our own thread ( Engineers ), apart from the odd comment about spelling and grammar, there are no insults. Do flight deck suffer from one upmanship and if your comments are a little wrong, your a plonker or worse. Most, if not all Engineers I know are helpful without being rude if they disagree with comments made. Why I wonder???

Simple, really. We fix problems, others cause them.

We are courteous in this forum, because at work we rip the micturate out of each other for most of the long day, so being nice is a refreshing change! But to be serious for a moment (what, me, serious?) for the best part, I find that if you keep a civil tongue in your gob, (that is because I cannot spell mouth, Moon!) that at least goes some way to putting your point across and getting your way. If you rant and become abusive then it can go against you to the point that no one takes any notice of you. Plus, it goes some way to showing the Ppruning public that we oily, greasey thechey types (and avionics too Moon) are of superior breeding to others in the aviation field who only think that they are superior to us.

Just remember that the technology to fly without aircrew already exists, but without a CRS, the aircraft goes nowhere. But that is a different thread an a different forum.

Yours in Pprune juice

JFD

Plus their (flight crews) egos are so big they get into the way ... which makes me wonder .. that should be the same for avios :P

MB
-> Engines .. screw 'em wires .. err ahhmm . damn it's a FADEC

Just to prove a point, Random look at "rumours and news" tonight. Top thread entitled "Luton issues warning to Easyjet". Nine comments down LTN MAN lays into three of his collegues. Strange bunch!!!

Ya bunch of f*@kin greasey morons!Most of you can't even spell engunear.Oh and anyone want to "souix"; my solicitors are Norfolk&Good.

aeroguru

beforr i joyned thu air farce i cuddunt even spelll engunear. now i are wun!

**********************************
Through difficulties to the cinema

I jes wish I cud call mysulf an engunear--I got a wayz to go, but bein a mekanik is good enuf fur now I rekin!
I'm nut only a greese munkey--I'm a wuman, so that makez it jus that much harder fur me ta ovurkum bein a morron! :)

------------------
"You screw up, just this much; you'll be flying a cargo plane full of rubber dog-!!!!! outta Hong Kong"!

I r an engynier an i don aff 2 tayk pizz from u lot. Got bloke at work hoo iz prym candydayt. Heez layzee, ignrunt and iz not lykd. Him got shock cumming.....blokes av ad enuff.

Why should we take the P out of each other? We are all in the same boat together, some may not be able to row in the same direction but after all most of us chose to do this for a living!

------------------
It's not what you know, it's how you bluff!

F%&*in pilots got all the visa cards & we still get s*&t on, regardless of the wonders we produce, and still get payed peanuts, a very dissgrutiled gingerbeer!!!!!!!!!


7

Maybe we're just nice peeps?
I was going to suggest that perhaps spelling is more difficult when you're being rude, but now I've read a couple of replies above I need to go away & think again..
Very best of good wishes to all (esp. girlie fixers, who are the best reason to be polite on the hangar floor, just like at home.)
Luv you all to pieces
xxx

------------------
Ground tested, no fault found

Engineers courteous? I never thought of it like that before, but upon reflection I realise that its generally true, at least amongst ourselves. Perhaps its because we are "professionals?"

(exits left, stroking chin thoughtfully...)

**********************************
Through difficulties to the cinema

Coriolis,
Lordavmercy baby!!
I almost fell off my chair reading this....
Care to share that with a few of my buddies out here? Treating me politely is not exactly their, um... forte. Not that I'm complaining, mind you; I've learned to take the piss out of them with the same ruthless efficiency! :)

And, truth be known, I think it'd set my teeth on edge if they were always walking (politley) on egg-shells around me anyway.




------------------
"You screw up, just this much; you'll be flying a cargo plane full of rubber dog-!!!!! outta Hong Kong"!

'Courteous' , and there was I thinking we Engineers had a reputation to uphold .
Ahem , I think it's time I changed my personal profile.

---------------------------------------------
Sophistication , don't talk to me about sophistication eh arve bin to Leeds me

I think the mutual respect stems from understanding our jobs.

So right, It's a pity the ALAE chat page was forced to closed down, I suppose we'll have to share with the flight deck numpties, still they probably haven't the intelligence to scroll down this far , so we might get left in peace!

Sounds like some of you guys could play extras in 'Deliverance'!!!
(Can any of you by any chance play the banjo??) :)



[This message has been edited by spanners (edited 13 April 2001).]

Good morning, my esteemed fellow engineers and technicians.
I'm afraid our peers(who we have to greet and converse technically with on aircraft flight decks), over on the rumours and news forum are devalueing themselves and calling each other pimps and whores.
Albeit very highly paid pimps and whores.

I feel compelled to add to this topic, take it as you will. Last week, A young Cessna driver couldn't park in our normal spots and had to put his chariot some distance away. As this particular fellow had overnighted, he had some extra personal belongings with him. Being the kind hearted bloke I am, I jumped on the tractor and drove down to collect him. When we got back to the hangar, he jumped off and walked away........No thanks, nothing.
I think that says it all, different respective attitudes.



[This message has been edited by Kanga767 (edited 18 April 2001).]

See why I consider pilots fair game? http://www.pprune.org/ubb/NonCGI/tongue.gif

[This message has been edited by Bus429 (edited 18 April 2001).]