PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Engineers & Technicians (https://www.pprune.org/engineers-technicians-22/)
-   -   Video Cams and Intercomm.... (https://www.pprune.org/engineers-technicians/17891-video-cams-intercomm.html)

Nishko 16th November 2000 19:40

Video Cams and Intercomm....
 
PPRuNe, this is N-ISH......
Have any of you tried plugging the remote mic input on a video camera into a split off feed from the intercom in a C152 for example? If so, were the results any good? I'd like to get a friend to film a flight and would rather have our voices (and ATC) on the sound track rather than *just* engine noise.....

Any advice?

Cheers,

Nish.


Shed Driver 17th November 2000 18:28

I have done it on a few aircraft, last one was the Shorts, works very well. Just be careful with doing it on lighties as the intercoms are usually pretty poor, and you may pick up a lot of white noise, if you turn the intercom of when you do not wish to record vox, only RT, it works good then too. With a little effort you can make a patch lead to lug into a vacant headset socket, again may be a problem on a light aircraft as you might be using both sets of sockets, then maybe use a spitter. Have fun, nothing beats good quality airborne video footage!


All times are GMT. The time now is 20:05.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.