Airbus CFDS Flight Phases
 

Anyone got a good reference for the CFDS flight phases as noted on the PFR. In particular for the small bus (318, 9 etc) if different from the 340's.
I'm after a short description for each phase and what inputs the CFDS uses to determine the phase.

E.G. Phase 2 - Main engine start (inputs obvious!!)

Had a quick squizz through my type notes and the airbus site but can't find anything. If it's in the AMM can someone give me a reference.

Ta very much!

AMM 31-67-00, ECAM SYSTEM/STATUS DISPLAY - DESCRIPTION AND OPERATION

Have a peek at fig. 16

:ok:

3my

Sorry 3my ;) but:
the correct one for A320Fam is AMM 31-32-00 "Functions Proper to the CFDIU "
A(3) Periods for the establishment of these reports and availability on the MCDU
Figure 038
http://img239.exs.cx/img239/7821/figure0387jf.th.jpg

Ingo

Thanks fellas , knew I could rely on this forum!
:)

I stand corrected IFP,

Your figure better illustrates flight phases as captured by CFDIU. Our AMM's must be different revisions. Your fig 38 is my fig 41.

Cheers
3my

Maybe we have other Cutomer Database and Rev.Date(I have Nov 01/04)
I only want to say that your quoted ATA (31-67-00 Fig16) wasn´t the correct answer for
flight phases in correlation to PFR.
In my AMM your Fig. shows flight phases versus appropriate aircraft system page.
But at the end you get the same flight phases.
Sorry I was in "split hair" mode. http://www.!!!!!!!!!!!!!!/discussion...ies/guilty.gif

Ingo