PPRuNe Forums - Getting into NDT

Quote:

Originally Posted by hatton (Post 10161445)

How hard is it to get into NDT and does anyone know of Engineers having B2 and NDT level 3 qualification and doing Avionics and NDT work.

Don't know EU rules, but on this side anything above a Level 1 NDT rating requires extensive training with a Level 3 only for those who spend 20+ years performing NDT as a career. A number of aircraft/engine OEMs will allow an A&P to perform certain specific Level 1 checks (mostly dye penetrant) without a Level 1 rating provided it's in accordance with a specific OEM process.

A Level 2 rating requires specific documented work/study as a NDT tech for each specialty (Dye, Mag, Eddy, etc) for extended length of time plus testing requirements. For example, 1200 mhrs dye penetrant, 1500 mhrs eddy current. Most Level 2 A&Ps I know spent years working in NDT either non-aviation or in a Part 145 shop and obtained their A&P after their Level 2.

As for a Level 3, outside of established MROs or Repair Stations, independent Level 3 techs are few and far between. Unless you spent your career in NDT a Level 3 rating is not attainable--with or without an A&P. The only Level 3 A&P I know obtained his A&P concurrently with his NDT rating, but it took 25 years to obtain the necessary documented experience to reach Level 3 and qualify to take his A&P tests.

Hope that helps.
W1