Form 1's and FAA 8130-3's
What's the legal eagle speak for accepting these? I've come to believe that any component that has either of these is perfectly acceptable (along with an S tag) to be fitted to a UK registered aircraft.
A colleague of mine believes that the FAA form is not acceptable and there needs to be a Form 1 before fitment can take place. Is there anywhere it's laid down outside company procedures which is acceptable and which is not? (ie CAA or EASA regs). Also, where is the critieria for raising Form 1's to be found. I've scoured the EASA site but no joy as it hasn't improved much and is still a nightmare to navigate. Fargoo :ok: |
Fargo, if the 8130 has an EASA statement on it from an EASA approved company in the states then it is ok to use it, the CAA have been picking organisations up that don't have the relevant box ( think it's 10 ) ticked with the EASA CRS statement on an 8130.
As for form 1 criteria, part 145 I think or part 21. |
For UK registered aircraft.
1.EASA Form One. 2.FAA 8130-3 with dual certification (Box 12/13?) and EASA 145 statement 3.FAA 8130-3 (Only if part is new, not repaired/overhauled etc) |
Flight mech is correct box 13 has to be filled in (dual release) also a way of certifying is if the part is new and comes with a certificate of conformity (c of c).
|
From EASA Part 21
21A.307 Release of parts and appliances for installation No part or appliance (except a standard part), shall be eligible for installation in a type-certificated product unless it is: (a) Accompanied by an authorised release certificate (EASA Form 1), certifying airworthiness; and (b) Marked in accordance with Subpart Q. GM 21A.307 Release of Parts and Appliances for Installation “Authorised release certificate certifying airworthiness for a new part or appliance” means certifying that the part or appliance conforms with the approved design data and is in condition for safe operation. This doesn't mention the FAA 8130-3, but the EASA-FAA Bi-lateral allows use of an 8130-3 when correctly certified in box 13 by a repair station holding EASA approval. |
Thanks to all and in particular the Part 21 ref on the last post :ok:
|
do a pdf search of the 2042/2003 and you will find all the information you need especially appendix II of the part M which deals with the use of the EASA form 1
|
CAAIP Leaflet 1-12 - The Acceptance of New Aircraft Components - may also answer your question
|
All times are GMT. The time now is 13:06. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.