PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Engineers & Technicians (https://www.pprune.org/engineers-technicians-22/)
-   -   EASA 66 license conversion (https://www.pprune.org/engineers-technicians/286856-easa-66-license-conversion.html)

duson 5th Aug 2007 19:45

EASA 66 license conversion
 
hi, there: good day

is there any possibility of 66 license out of EU member states converted to EASA 66 license??

and where I can find the license conversion legislative document of EASA?

many thanks buddies:)

Whinging Tinny 6th Aug 2007 16:50

"Is there any possibility of 66 license out of EU member states converted to EASA 66 license??"

Not 100% sure what you mean, but for starters have you looked at the EASA website or one of the EASA member states aviation authority websites?

Engineer 6th Aug 2007 21:08

You will need to look at Commission Regulation (EC) No 2042/2003 Annex III.

But I don't think it will be happy reading for you especially 66 A70 shown below unless you qualify.


Conversion provisions

(a) The holder of a certifying staff qualification valid in a Member State, prior to the date of entry into force of this Part shall be issued an aircraft maintenance licence without further examination subject to the conditions specified in 66.B.300.

(b) A person undergoing a qualification process valid in a Member State, prior to the date of entry into force of this Part may continue to be qualified. The holder of a qualification gained following such qualification process shall be issued an aircraft maintenance licence without further examination subject to he conditions specified in 66.B.300

(c) Where necessary, the aircraft maintenance licence shall contain technical limitations in relation to the scope of the pre-existing qualification.
Hope it helps

spannersatcx 7th Aug 2007 09:53

If you are talking of a Hong Kong HKAR66 licence, although the system was set up by the CAA and it is exactly the same as the UK CAA system, the answer is no at this time.

duson 9th Aug 2007 08:56

thanks mates.

spannersatcx, thanks, I am exact HKAR-66 engineer. the conversion seems negative.

Engineer, thanks for your info

Whinging Tinny, thanks, I am reading the regulations of EASA

Whinging Tinny 9th Aug 2007 15:04

Good luck if you can make heads or tails of it.
Not exactly the most clearly laid out website there is.:ugh:
Makes the CAA's look like fibre optic cable standard.


All times are GMT. The time now is 23:23.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.