Polished alloy on aircraft
Thread Starter
Join Date: Nov 2017
Location: Amblesidel
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Polished alloy on aircraft
Just wondered what the process was or is for the highly polished fuselage, wings and propellers on aircraft;
(a) How was the surface brought up to a shine?
(b) How was the shine maintained?
(c) Are there issues with oxidation or corrosion?
(d) These days would there be and issues with highly polished airframes or props?
(a) How was the surface brought up to a shine?
(b) How was the shine maintained?
(c) Are there issues with oxidation or corrosion?
(d) These days would there be and issues with highly polished airframes or props?
Join Date: Feb 2006
Location: Hanging off the end of a thread
Posts: 32,921
Received 2,841 Likes
on
1,213 Posts
If I remember correctly, the Royal Flight used to polish the Andover lower fuselages to a mirror finish, it was found during some NDT inspection that a fair amount of the metal had been polished away resulting in the need for extensive reskinning, they than painted the lower half grey.
Little tip when polishing and you remove all the black residue you get, instead of going through a million cloths, use one and put flour, yup that's right, household flour, plain or self rising in the cloth, that will take off and absorb the black residue and speed up the process.
Little tip when polishing and you remove all the black residue you get, instead of going through a million cloths, use one and put flour, yup that's right, household flour, plain or self rising in the cloth, that will take off and absorb the black residue and speed up the process.
Join Date: May 2009
Location: England
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
This link is good to read https://www.flightglobal.com/FlightP...20-%202323.PDF
a) A polishing product such as Wadpol, Wadpol is a tin of fibrous cloth pre-impregnated with polish is used in a rotary motion to the 'bright' areas such as leading edges and intakes. It is then buffed using a rotary buffer such as those used for cars.
b) different products can maintain the shine, but mostly after the finish dulls, re-buff or re-polish is required periodically.
c) the application of polish should not remove too much material so that corrosion preventative coatings are removed i.e alclad
d) Although some operators still have certain aircraft in bare aluminium it is expensive to upkeep looking good, American Airlines have a few in their fleet in retro livery.
a) A polishing product such as Wadpol, Wadpol is a tin of fibrous cloth pre-impregnated with polish is used in a rotary motion to the 'bright' areas such as leading edges and intakes. It is then buffed using a rotary buffer such as those used for cars.
b) different products can maintain the shine, but mostly after the finish dulls, re-buff or re-polish is required periodically.
c) the application of polish should not remove too much material so that corrosion preventative coatings are removed i.e alclad
d) Although some operators still have certain aircraft in bare aluminium it is expensive to upkeep looking good, American Airlines have a few in their fleet in retro livery.
Join Date: Feb 2006
Location: Hanging off the end of a thread
Posts: 32,921
Received 2,841 Likes
on
1,213 Posts
a) A polishing product such as Wadpol, Wadpol is a tin of fibrous cloth pre-impregnated with polish is used in a rotary motion to the 'bright' areas such as leading edges and intakes. It is then buffed using a rotary buffer such as those used for cars.