![]() |
Help with ADSL Connection
I have just changed to ADSL and initial connection was good with everything working using Wanadoo.fr and the Ethernet modem as supplied by the ISP. As there was not a firewall with the modem I changed to a Netgear modem/router/firewall and now only Firefox and Thunderbird work, all other programs e.g. Mail Washer, Eudora etc. try to connect to Wanadoo without success although it is already connected. I have removed all traces of Wanadoo from my machine except that which remains in the Netgear and think that the problem may lie within the Tools/Internet options/Connections of Internet explorer. In Network connections I have:-_
1394 Connection (1394 Net Adaptor) Local Area Connection (NVIDIA nForce MCP Networking Adaptor) Local Area Connection 1 (D-Link DFE-530TX PCI Ethernet Adaptor revC) This being the one that shows as being connected. Any assistance gratefully received. |
Can't personally help.
But, I've just installed a Belkin modem router, and received a huge amount of help in setting up by ringing their customer support service. (In Belkin's case, very helpful, 27/4, and free!- not often that you have this nowadays!) The other source of assistance would be to phone Wanadoo. |
Firewall Configuration
Hi Shack,
What you describe sounds like a firewall configuration issue. Log in to your router as admin using your browser - the default netgear address is http://192.168.0.1 Then check the logs this should give an indication of where the problem lies. EG |
Thanks ExGrunt that was the problem.
|
| All times are GMT. The time now is 13:08. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.