PPRuNe Forums - UPS Help needed

PPRuNe Forums (https://www.pprune.org/)

- Computer/Internet Issues & Troubleshooting (https://www.pprune.org/computer-internet-issues-troubleshooting-46/)

- - UPS Help needed (https://www.pprune.org/computer-internet-issues-troubleshooting/169971-ups-help-needed.html)

Flying Mushroom

6th April 2005 19:15

UPS Help needed

I have been given a very handy UPS and need help/advice....

Does anyone have any info or knowledge of the MERLIN-GERIN Pulsar ES7 ups?

I'd be very grateful for any Windows XP drivers for this as I'd like to connect it and set it up to automatically shutdown windows in the event of a power cut.

What sort of control cable is needed to connect it to the computer (I don't mean the power supply cable ;) )

Any help would be most gratefully recieved.

Thanks in advance

FM :ok:

Memetic

6th April 2005 21:55

Try asking here :)

http://www.merlingerin.com/MG/en/contact/index.htm

THey don't seem to have technical documents on their site, it has little real contnet, mostly translated vision statements I think! Maybe the French version is better.

All Ahead Full

7th April 2005 11:56

You will a 9-pin cable to connect the UPS to a com port on your machine, if you have no comm port you get get com - usb convertors to allow the connection.

Connect it all up, and see what the hardware detection wizard says - if it will not auto detect then it's off to the web site for drivers I'm afraid

ORAC	7th April 2005 12:30

MGE = Merlin Gerin
MGE software, Manual

unclenelli

9th April 2005 02:18

Merlin Gerin

You could try getting in touch with MG direct. They have a factory in the UK.

Merlin Gerin
Cayton Low Road
Eastfield
Scarborough
North Yorkshire.

Dunno any phone numbers or email addresses though.

All times are GMT. The time now is 10:50.