D-Link Wireless 108G
I have a D-Link 108G wireless access point that I need to re-set. The re-set button simply will not work and because I have no idea of the current IP settings I cannot access the unit to do a soft re-set. Can anyone please suggest (other than the bin) what I might do with it to be able to use it again?
|
Google says have you tried 192.168.1.1 ?
|
What model number is it ?
Google says probably DWL-2100AP.In that case,the IP address is 192.168.0.50 (if you haven't changed the default factory IP).User name is admin,leave password field blank |
why do you need to reset it? Presumably lost connectivity?
Combined with an inability to reset it, that suggests a failed router. As to its IP address - what does running IPCONFIG /ALL from the command prompt give you? If the router is working, that should tell you its IP address Personally, despite what you said, I'd bin it. Its a -G series device so must be close to four years old. D-link routers don't last forever - they tend to give up, and failing to respond to DHCP routing requests is one of the first symptoms |
I think Milo has the right idea because nothing I have tried, even with you kind suggestions, works - so bin here it comes.
thanks everyone. |
On my old D-link router to reset you had to remove power press and hold the reset button and plug it in again.While holding the reset button in for around 5 seconds or so then release the reset button.
Max |
All times are GMT. The time now is 06:11. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.