QUOTE
Apologisies if the incorrect Forum but didn't really know where to post this.
The facility to 'quote' on threads has disappeared. (The Reply & Edit icons are still displayed). Is this a set up that I have somehow changed or is this a PPRuNe generic problem? |
IMHO it was the most missused facility on Pprune, hopefully it has gone for good.
Many more recent members may not know that it was only introduced with the last big upgrade, not that long ago. Contrary to the opinion of those whom are so fond of using the "Quote", even when they are the next to post, if you just name the person you wish to reply to we will know what you are referring to. |
Henry crun,
Do I take it then that ‘Quote’ is not available on yours either? |
I have just had another look and unfortunately it is still there, I cannot be sure but I think it is now in a different place.
|
Henry,
Then I must have screwed mine up somehow. Thanks |
Can you tell all the others who are so fond of using it how you managed that, hopefully they will do the same. :)
|
I'm not sure why you think I'm fond of it?
It's just annoying me that it's disappeared and I don't know why or what I've done to cause this but when I find out, rest assured you'll be the first to know. |
Originally Posted by ZFT
(Post 3100890)
I'm not sure why you think I'm fond of it?
It's just annoying me that it's disappeared and I don't know why or what I've done to cause this but when I find out, rest assured you'll be the first to know. Henry - I promise not to abuse it. |
I did not say you are fond of using it, if you read my post again I was referring to others who, IMHO, misuse it.
|
Mr Crun has it in one (I would quote him if I could.......................:) )
|
Henry,
I have re-read and you of course are correct. Cheers |
Originally Posted by BOAC
(I would quote him if I could.......................:) )
Click Reply Type [ Type Quote= Type the name in inverted commas Type ] Click paste Type [/ Type Quote Type ] Type your answer Job done. It was easier when you could click on "Quote", but hey... |
Click the little button to the right of Reply, the click then Reply button. :ok:
|
Originally Posted by vapilot2004
(Post 3101549)
Click the little button to the right of Reply, the click then Reply button. :ok:
|
Originally Posted by vapilot2004
(Post 3101549)
Click the little button to the right of Reply, the click then Reply button. :ok:
Judging by the replies on this thread, it'll drive some up the wall when people start learning how to use this! |
Ta Keef - 'twas TIC:)
|
Originally Posted by BOAC
(Post 3102573)
Ta Keef - 'twas TIC:)
|
Originally Posted by Globaliser
(Post 3102277)
And you can now quote more than one post in a single reply: just click the "little buttons" of every post you want to quote before clicking Reply.
Judging by the replies on this thread, it'll drive some up the wall when people start learning how to use this!
Originally Posted by Keef
(Post 3102213)
Thanks! Nifty!
|
It's just as well you quoted those two posts vapilot2004, otherwise we wouldn't have had the first idea of what you were referring to. :p
|
I get that alot. :\
|
All times are GMT. The time now is 16:38. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.