Broadband installation problems
I've used dialup for around 5 yrs now and have always been satisfied with the service.
I have a P3 500 with 256mb using Windows 98SE I've now taken the big step into the world of BB and having registered etc. got an installation date of 23rd Feb. All the bits and pieces arrived, and installation started. All went fine until the point I linked the Voyager 205 router into my PC (via USB). Got the 'detecting new hardware' message as you normally do, but then a pop-up box said that the system was 'scanning' and that the source was the Windows 98 CD-ROM. The documentation say that Win98SE users may have to enter their system disk when requested, but there was no 'request' to do this. After a couple of minutes a new popup box tells me that the system can't find the file and suggests cleaning and reinserting the disk. I've deinstalled and tried again, this time inserting the 'un-requested' system disk, but still the same problem. I've tried the ISPs help desk, but last call was unsatisfactory with no help offered other than contact Microsoft... pity they don't support Win98SE anymore So..... Anyone have any idea around what the probably could be.. is it software or my antique-ish pc? Does anyone know how to fix the issue? Before I ordered I used the ISPs own checker to make sure the PC was suitable... Cheers |
I've tried the ISPs help desk, but last call was unsatisfactory with no help offered other than contact Microsoft |
When the computer says 'can not find file'. Click on the Browse button, the file name it is searching for should be displayed. Do a search for this file and then point the computer to this directory and it should install the file.
|
I had similar problems with a similar system.
Searching for the missing files proved fruitless because they're all hidden away in zipped cabs files, which I found using explorer at windows, then options, then cabs. It did take a long time to find the missing files, but they are in a sort of order as you look through them. Hope this helps. |
Try these paths when asked for the Win98 CD:
c:\windows c:\windows\system c:\windows\cabs (not sure if w98 has this) sometimes the files can be found there. Also you can do a search for *.cab files on your drive and WinRar can usually open them (might be a mission though) Alternatively the win98 driver can be found here Good Luck ! Z1 |
Quite often the file is already in the windows directory installed on the computer. Just point the computer to the directory and it will re-install for the program.
|
Just a thought. Does the modem require USB2 or will it work with USB1? I presume your machine only has USB1
|
Turned out to be missing Win98 files - couldn't tell what they were, so decided to reinstall Windows98.
This has sorted the problem.:D |
All times are GMT. The time now is 01:46. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.