PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Computer/Internet Issues & Troubleshooting (https://www.pprune.org/computer-internet-issues-troubleshooting-46/)
-   -   Help with DVD Decrypter / DVD Shrink 3.2 (https://www.pprune.org/computer-internet-issues-troubleshooting/156227-help-dvd-decrypter-dvd-shrink-3-2-a.html)

Sky_Captain 18th Dec 2004 23:54

Help with DVD Decrypter / DVD Shrink 3.2
 
I know there has been recent topics about these programmes, but i've come to the burning process on both programmes and i'm looking for help.

I initially used DVD Shrink, everything was fine until burning. The system spat out the DVD/-R and insisted on a DVD/RW. Is there any way to change the properties to allow the programme to burn on to a DVD/-R?

After that I tried DVD Decrypter. Everything again went fine until this error occured:

I/O Error!

Device [1:0:0] DVD+RW DW-P54 1.8c (D: ) (ATA)

ScsiStatus: 0x02
Interpretation: Check Condition

Sense Area: 70 00 05.....(these number continue on for some time)
Interpretation: Cannot Write Medium - Incompatible Format

When it comes to computers, i'm still an amatuer. This is my first travelling laptop, and i'd love to get it set up right from the beginning.

Any Help would be greatly Appreciated.

Many Thanks,

S.C. :ok:

spannersatcx 19th Dec 2004 07:04

I've never used DVD shrink, so don't know about that, I prefer dvd2one.

It sounds like the dvd-r you are using is not recognised by your writer. You will need to check the manufacturers website for a compatability list, you may need to do a firmware update to get it to recognise the disks you are using. Just because it is a dvd-r doesn't necessarily mean your drive can recognise it I'm afraid.

stickyb 19th Dec 2004 07:34

Are you sure the drive accepts DVD-R, and not just DVD+R?

Sky_Captain 19th Dec 2004 07:42

Excuse the ignorance spannersatcx, still an amaueur at this, but how does one accomplish a firmware update? If it will solve the problem i'm wiling to try anything. Thanks again for the advice.

stickyb, positive my drive accepts both DVD/RW and DVD/-R.

S.C. :)

stickyb 20th Dec 2004 06:12

SC, it wasn't the RW i was querying, it was the distinction between DVD-R and DVD+R. Does your drive handle both formats?

All DVD discs should be lablled DVD+R (DVD+RW) or DVD-R (DVD-RW)

Some drives only accept one format, some handle both

spannersatcx 20th Dec 2004 12:59

Before going down the firmware route, I would suggest having a look at what media is compatible with your drive. Have a look at the manufacturers (of the drive/laptop) and see what media it recommends. I tried several different makes of media before I was happy with it. Most commonly compatible type is ritek, these can come in different guises, datawrite being one of them. Without trying to be rude, but sometimes the really cheap ones are not that good.

Naples Air Center, Inc. 20th Dec 2004 15:39

Sky_Captain,

I would first start with DVD+R Media first since is the winning standard at the moment.

Take Care,

Richard

Sky_Captain 20th Dec 2004 16:40

Thanks everybody for the replies :ok:

Like the clever person I am, I have just come to the realisation that the drive is only intended for DVD+R, and the DVDs I have been trying are -R, what a :mad: idiot I am for the simple mistake:=

stickyb, thanks for pointing out my mistake to me, sometimes the obvious answer is the one staring you in the face, shame I couldn't see it. :rolleyes:

spannersatcx, as regards the firmware route, there seems to be no updates for this Sony DVD+RW DW-P54A. But I will look in to the manufacturers recommendations. I presume I should be able to find that on a Sony website somewhere? I'll also have a look at the ritek ones you mentioned:)

Richard, thankfully mine is the winning standard, just wish I didn't spend the money on the wrong type of blanks! NAC aye, man I havn't been there for a fly in visit since about 2000. Was it your place that had that nice sea-food place on the beach or was it in Venice. Just remember the nice food and great view from Sharky's :cool:

Naples Air Center, Inc. 20th Dec 2004 16:51

Sky_Captain,

Sharky's is in Venice and it is still a very popular destinations for our hour builders to catch a bite to eat.

It is time for you to come back to enjoy Paradise. It has been too long. ;)

Take Care,

Richard

Sky_Captain 20th Dec 2004 17:03

Considering visiting the strip in Vegas next summer, Black Jack be my game. But if my better half has her way, cruising out of miami it will be. As for me, I can never pass up the oppertunity when in florida to take in some flying. If thats the case i promise to drop in and say hello :cool:

Is my memory as bad as ever or is it a field to the north of you that has circuiting height of 800ft :confused:

S.C.

Naples Air Center, Inc. 20th Dec 2004 17:29

Sky_Captain,

If you hit The Strip, do not gamble away the airline tickets. ;)

Take Care,

Richard

P.S. There are casinos on all the Cruise Ships now, so you cannot lose. :ok:

Sky_Captain 20th Dec 2004 17:36

Richard you are a genius ;)

Thanks for making my day,

Take Care,

S.C. :ok:

Naples Air Center, Inc. 20th Dec 2004 17:51

Sky_Captain,

Give Mrs. Sky_Captain the option for whatever she wants to do on this holiday and you might just end up here:

Carnivale Valor Casino

http://www.carnival.com/CMS/Images/M...asino_hdr2.jpg

http://www.carnival.com/CMS/Images/M.../casino_11.jpg

http://www.carnival.com/CMS/Images/M...l/casino_4.jpg

http://www.carnival.com/CMS/Images/M...l/casino_6.jpg

It is not the Bellagio, but it has other advantages. ;)

Richard

Sky_Captain 20th Dec 2004 18:27

Brilliant :)

Believe it or not, we were choosing only between 2 ships to travel on, either the Cunard QM2, or one of the Carnival Cruise Ships. Think that might just sway my verdict a little. ;)

Take Care Richard,

Happy Christmas,

S.C. :D

Naples Air Center, Inc. 20th Dec 2004 21:04

You too Sky_Captain.

Richard

spannersatcx 21st Dec 2004 08:25

Sony Firmware ------US only--------


All times are GMT. The time now is 04:56.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.