PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Biz Jets, Ag Flying, GA etc. (https://www.pprune.org/biz-jets-ag-flying-ga-etc-36/)
-   -   Time Lapse video of a Global Express 8C Inspection (https://www.pprune.org/biz-jets-ag-flying-ga-etc/493266-time-lapse-video-global-express-8c-inspection.html)

robbreid 18th Aug 2012 00:18

Time Lapse video of a Global Express 8C Inspection
 
Standard Aero website

I've no idea why it's posting it twice?, as long as it works - just one video!

?rel=0" frameborder="0" gesture="media" allow="encrypted-media" allowfullscreen>

G-SPOTs Lost 18th Aug 2012 06:03

Didn't show em nicking the kitkats out of the galley did it? :}

jr of dallas 18th Aug 2012 08:24

What is it, Bombardier propaganda? :)
Nice one.

nomorecatering 19th Aug 2012 07:29

Does anyone have an ide of what that maintenance and painting would have cost, my gf asked me. I said i dunno, maybe 750,000 to 1.2 million?

robbreid 20th Aug 2012 12:14

StandardAero

Lissou 27th Nov 2013 18:08

it should be better to avoid standardaero people due to the poor quality of the job

Tray Surfer 28th Nov 2013 18:19

Still interesting to watch... Find all this sort of stuff fascinating.

Not quite the same, but doing an aircraft visit during my 747 conversion course, I got to go into the avionics bay and into the cargo hold... I was over the moon! :)

ivor toolbox 29th Nov 2013 10:04

With an aeroplane that has fully hydraulic powered controls, then surface balancing is not necessary, simples.

ttfn

silverware 29th Nov 2013 20:27

Can anyone shed a light on the cost per minute filmed, kinda curious.

one dot right 30th Nov 2013 07:52


With an aeroplane that has fully hydraulic powered controls, then surface balancing is not necessary, simples.
Not as I recall. Any slop in the linkages can cause flutter/control reversal with unbalanced control surfaces.

CL300 30th Nov 2013 11:48

and if there is no linkage ?

one dot right 30th Nov 2013 13:22


and if there is no linkage ?
There is always a linkage. The PCU has a ball link with a pin through it on the A/C structure and the same on the control surface. Any wear on these results in movement.


All times are GMT. The time now is 00:05.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.