Go Back  PPRuNe Forums > Aircrew Forums > Biz Jets, Ag Flying, GA etc.
Reload this Page >

Wheels Up KA350 After Engine Start Extended Delays Before Taxiing

Biz Jets, Ag Flying, GA etc. The place for discussion of issues related to corporate, Ag and GA aviation. If you're a professional pilot and don't fly for the airlines then try here.

Wheels Up KA350 After Engine Start Extended Delays Before Taxiing

Old 11th Aug 2019, 00:28
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2009
Location: Phoenix
Age: 57
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Wheels Up KA350 After Engine Start Extended Delays Before Taxiing

Hey looking for anyone who is familiar with wheels up King air 350. I work the line for a major FBO and wheels up is a regular customer and my question is after they start up engines we have an extremely long delay before they can taxi and I'm trying to figure out why?

Here at KSDL (PHX) everyone one knows how hot it can get and the ramp temps are sometimes 35* hotter than the OAT. When we are marshalling them out they can sit for 20 mins or longer and it's not due to ground holds, taxi clearances but we can't get a straight answer about what they may be doing.

I'm looking for any technical info regarding their after start procedures that has them sitting so long while we are roasting in the intense heat. I'm a pilot but not a paid pilot yet so I do understand the older King Air gyro spin up and stabilization but I don't know if the the newer 350's have to observe the same wait time after start up. Any info is greatly appreciated! Thanks!
BlkAv8tor2003 is offline  
Old 11th Aug 2019, 21:26
  #2 (permalink)  
 
Join Date: Feb 2013
Location: roundincircles
Posts: 124
Received 0 Likes on 0 Posts
I know nothing about WU however I do know that there is nothing required on a KA350 to prevent you from departing the FBO in a prompt manner just like all your other customers.

My guess the delay is due to how their pilot standard company operating procedures are written.
holdingagain is offline  
Old 12th Aug 2019, 06:03
  #3 (permalink)  
 
Join Date: Feb 2007
Location: Various at the moment
Posts: 1,171
Likes: 0
Received 7 Likes on 1 Post
You could ask the pilots or would that be too easy.
dc9-32 is offline  
Old 12th Aug 2019, 07:51
  #4 (permalink)  
 
Join Date: Mar 2004
Location: schermoney and left front seat
Age: 57
Posts: 2,437
Received 0 Likes on 0 Posts
"but we can't get a straight answer about what they may be doing."

This would lead me to believe the TO tried that approach already.

And btw, any Gyro that takes more than a few minutes to spin up, I´d have removed for repairs. Typically in a PL21 equipped KA, it takes something like 2 minutes after second startup to be ready to taxi, if you`re slow. (and not training or troubleshooting)
His dudeness is offline  
Old 12th Aug 2019, 08:34
  #5 (permalink)  
 
Join Date: Nov 2007
Location: In the sandy.
Age: 55
Posts: 309
Likes: 0
Received 0 Likes on 0 Posts
IRS alignment? Sorry if that is a stupid answer - haven't flown a turboprop with glass (ever) or a turboprop (at all) since the '80s.
Mister Warning is offline  
Old 12th Aug 2019, 09:10
  #6 (permalink)  
 
Join Date: Feb 2013
Location: roundincircles
Posts: 124
Received 0 Likes on 0 Posts
Mister Warning, No IRS fitted, normally a single GPS
holdingagain is offline  
Old 12th Aug 2019, 10:40
  #7 (permalink)  
 
Join Date: Nov 2007
Location: In the sandy.
Age: 55
Posts: 309
Likes: 0
Received 0 Likes on 0 Posts
Thanks Holding..... not even a retrofit AHRS?
https://www.rockwellcollins.com/~/me...%20012014.aspx
Mister Warning is offline  
Old 12th Aug 2019, 13:52
  #8 (permalink)  
 
Join Date: Oct 2003
Location: If this is Tuesday, it must be?
Posts: 649
Likes: 0
Received 0 Likes on 0 Posts
I think the WU 350s are Fusion aircraft, so yes, AHRS and interminable setup after start, particularly when you're new to it.
https://www.rockwellcollins.com/Prod...-King-Air.aspx
BizJetJock is offline  
Old 13th Aug 2019, 02:30
  #9 (permalink)  
 
Join Date: Feb 2013
Location: roundincircles
Posts: 124
Received 0 Likes on 0 Posts
MW, no problem with retro fit. No time on Fusion but would assume once competent you could be off the ramp just as quick as the next guy
holdingagain is offline  
Old 13th Aug 2019, 10:59
  #10 (permalink)  
Thread Starter
 
Join Date: Feb 2009
Location: Phoenix
Age: 57
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by dc9-32
You could ask the pilots or would that be too easy.
Asking several crews over several weeks was the first thing I did. I would get everything from loading flight plans, IRS and GPS alignment issues but the one thing I didn't get was policy or ops manual requires etc. The only reason I questioned it in the first place was it's never consistent.
BlkAv8tor2003 is offline  
Old 13th Aug 2019, 12:54
  #11 (permalink)  
 
Join Date: Apr 2010
Location: California
Posts: 282
Likes: 0
Received 0 Likes on 0 Posts
Does this sitting for 20 mins occur during every Wheels Up departure and only on the Wheels Up King Air? Often times there are delays at the destination airport and a departing aircraft will be held on the ramp until ATC can accept them. Most pilots operating an aircraft with an APU will check about flow and delays before engine start. Perhaps the Wheels Up gang doesn’t do this.
ksjc is offline  
Old 13th Aug 2019, 13:14
  #12 (permalink)  
 
Join Date: Feb 2016
Location: The North
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
If it's first departure of the day then there will be run up checks on the 350 to check, autofeather amongst other items. These are first flight of the day items only from the Beechcraft checklist but Wheels Up may have mandated this is done every flight. The 350 I've flown had Proline 21 not Fusion & on occasion we had ground requesting our delay in taxi.
Wings on the Winger is offline  
Old 13th Aug 2019, 16:02
  #13 (permalink)  
 
Join Date: Dec 2001
Location: Europe
Posts: 453
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by ksjc
Does this sitting for 20 mins occur during every Wheels Up departure and only on the Wheels Up King Air? Often times there are delays at the destination airport and a departing aircraft will be held on the ramp until ATC can accept them. Most pilots operating an aircraft with an APU will check about flow and delays before engine start. Perhaps the Wheels Up gang doesn’t do this.
It says in the OP that it's not due to ground holds.
733driver is online now  
Old 14th Aug 2019, 01:21
  #14 (permalink)  
 
Join Date: Mar 2005
Location: N/A
Posts: 5,881
Received 362 Likes on 192 Posts
Practice with some operators is to do a ground run to get the full list of checks done when the pilot assumes duty, as they are of some length, thus enabling a quick get away when departing.
megan is offline  
Old 14th Aug 2019, 12:19
  #15 (permalink)  
 
Join Date: Apr 2013
Location: At home
Age: 63
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Speaking as a former WheelsUp pilot on the KingAir; There is a very long and complete check for the first flight of the day. It involves a complete electrical, trim, auto-pilot, de-icing, pressurization, and other items check. The check section in the QRH is three pages long. It does take a long time. Later flights in the day have a greatly reduced check list.
Zaphod Beblebrox is offline  
Old 15th Aug 2019, 12:11
  #16 (permalink)  
 
Join Date: Apr 2014
Location: Sky
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Zaphod Beblebrox
Speaking as a former WheelsUp pilot on the KingAir; There is a very long and complete check for the first flight of the day. It involves a complete electrical, trim, auto-pilot, de-icing, pressurization, and other items check. The check section in the QRH is three pages long. It does take a long time. Later flights in the day have a greatly reduced check list.
Second question: does Wheelsup charge actual Block Hours, calculated Blockhours (=FH plus allowing time for taxi of say 10 min) or FH?
Global_Global is offline  
Old 21st Aug 2019, 14:52
  #17 (permalink)  
Thread Starter
 
Join Date: Feb 2009
Location: Phoenix
Age: 57
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Zaphod Beblebrox
Speaking as a former WheelsUp pilot on the KingAir; There is a very long and complete check for the first flight of the day. It involves a complete electrical, trim, auto-pilot, de-icing, pressurization, and other items check. The check section in the QRH is three pages long. It does take a long time. Later flights in the day have a greatly reduced check list.
Zaphod, I get it for first flight of the day but what takes so long when the aircraft has been flying around? Are the general checklist more extensive than other King Air's privately owned meaning is this a "Wheels Up" thing?
BlkAv8tor2003 is offline  
Old 21st Aug 2019, 16:46
  #18 (permalink)  
 
Join Date: Apr 2013
Location: At home
Age: 63
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Global_Global
Second question: does Wheelsup charge actual Block Hours, calculated Blockhours (=FH plus allowing time for taxi of say 10 min) or FH?
l am not sure on that one. I know that the customer only pays for occupied hours, what ever that is. I think it is block time but I am not sure.
Zaphod Beblebrox is offline  
Old 21st Aug 2019, 16:51
  #19 (permalink)  
 
Join Date: Apr 2013
Location: At home
Age: 63
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
It’s a GAMA thing. Wheels Up, until the purchase of Travel Management Co, did not have an operating certificate. If you have ever attended a Flight Safety course on the king air you would know that they teach every single check in the book. It is a company thing. When I flew King Airs part 91 a long time ago we did the extensive checks only occasionally. Actually maintenance did a lot of them like vacuum and pressurization checks.

One reason is that these aircraft are away from maintenance bases for a long time. The extensive checks find the problems when they occur. Many part 91 operators get the airplanes back at home base every night or every other night and they are able to do these checks by maintenance or in the hangar.

It’s just the way they do things there.
Zaphod Beblebrox is offline  
Old 21st Aug 2019, 18:42
  #20 (permalink)  
 
Join Date: Jun 2009
Location: UK
Posts: 362
Received 0 Likes on 0 Posts
Originally Posted by Zaphod Beblebrox
It’s a GAMA thing.
General Aviation Manufacturers Association?
Journey Man is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.