Harvard/Texan Prop
 

Given that the Harvard(terrific as it is) was really a noisy converter can anyone tell me why it was never fitted with a 3 bladed prop!Surely this could have absorbed the considerable power in a less noisy fashion.

Thanks

Panda

The Australian CAC Wirraway which had as the T-6/Harvard/Texan the same ancestor in the NA-16, used a 3 blader.

And Hamilton Standard would have done what with its 4 million two blade props?
Dropped them on the enemy?

Maybe this Tinny

http://browningmgs.com/Images_1919A4...rceAirboat.jpg

(apologies for thread drift)

Without all the surplus Wasps and two-bladed props, the Beaver wouldn't have had its wonderful distinctive noise, although these days more and more have three blades.

The Wirraway had the geared version of the 1340, didn't it? That's the same engine as the Otter, thus the three-blade.

I,m sure P&W and Hamilton spent more time than putting a few figures on the back of a fag packet to optimise the best combination for North Americans demand for the engine / prop , I always thought that the noise was due to the fact that the engine had no reduction gear [for cheapness and relibability remember it was a training airplane] and the tips of the props were moving very fast
i'm more than ready to be "shot down in flames"

Why would you want to make a Harvard sound any different? How else could we have kept the good citizens of Moose Jaw awake at night, or get the attention of the blonde girl driving the combine? The Harvard sounds just the way God meant an aircraft to sound, now of course we have our Air Cadet L19s modified so they dont disturb the Nimbys, I gues they would rather have kids hanging around shopping malls than making noise with airplanes! {Now I feel much better!}

Do I remember that at max rpm the blade tips were just supersonic, which accounted for the noise?

Fog in brain perhaps.:\

As someone who had a lot to do with Harvards at 5 FTS (RAF Thornhill, S. Rhodesia) in the early 1950's ISTR that this turned out to be an urban myth. The diameter of the prop x the 2,600 rpm round the circumference wouldn't have led to the prop tips travelling faster than sound (760 mph). However, mathematics have improved since them and I'm willing to be corrected!

RAF Thornhill (5 FTS) 'F' Flight, line-up c. 1952 below.

http://i145.photobucket.com/albums/r...ghtline-up.jpg

super sonic props
 

My theory also, the other plane with the same problem was the Viscont [it wasn't called the whistler for nothing] and as props lost their efficency at those speeds many a £ was spent trying to solve the problem but bless em they never did so lets face it the Harvard/Texan was to put it bluntly a "throw away " airplane in its prime the engine /prop combination worked and we were left with the lovely noise, long may it continue .:D:D:D

Warmtoast, am suprised to note that they have the extended exhaust stack, we needed that for cabin heat in Canada, I also flew some in the Southern part of the World which had the short pipe and no cabin heat, mind you the drill was to block the students heat vent with bog paper, thus pushing all the warm air back to the instructors cockpit, some of those poor students from warmer climes must have frozen on a long cross country, but they all seemed to be none the worse for it on graduation day.

Hello Warmtoast.

"As someone who had a lot to do with Harvards at 5 FTS (RAF Thornhill, S. Rhodesia) in the early 1950's ISTR that this turned out to be an urban myth. The diameter of the prop x the 2,600 rpm round the circumference wouldn't have led to the prop tips travelling faster than sound (760 mph). However, mathematics have improved since them and I'm willing to be corrected!"

Agreed at low level, but it didnt take much of an altitude increase/decrease in temperature for it to happen.

OK mate, hat, coat, door.....

At Derby Aviation in Burnaston we did the annuals on the RAF University air squadrons aircraft for several univeristies every winter.
Every autumn they would ferry in a dozen or so, Chipmunks and Harvards.

We would do the annuals and mods etc and then in Spring several Ansons would arrive with the drivers to take them back to the unis!

When they were all lined up on the tarmac they were pretty inpressive but alas I did not get any pics.

With the prop noise the Harvards sounded quite aggressive compared with the Chippie:}

Departure day meant running around with spare Koffman barrels for the Chippies as they fired all the cartridges without a start !!:ok:

Usually we got a good beat up on departure ( Days before elf an safety:))

Clunk, someone on AvCanada said they used to install a two-blade on the Noorduyn JIN in the summer, to make the worlds loudest alarm clock. Just to wake up the good citizens of Red Lake. :p

...and just think what it was like with 21 of them!
http://i145.photobucket.com/albums/r...tballFinal.jpg



It could get pretty parky in Rhodesia. Thornhill was 4,640ft above sea level and although being in the tropics, the Southern Hemisphere winter could be cold. Get up to 4,000 above ground level and you would be flying at nearly 10,000ft, which at night could be considered brass-monkey cold.

Photo below of the heater pipe showing how it runs into the cockpit after passing through the centre of the exhaust pipe as a rudimentary heat-exchanger. ISTR that the heat control was a butterfly-type valve in the pipe in the cockpit by the right foot that you opened as required. The pipe continued along the fuselage wall into the instructor's seat at the rear which had a similar control.


http://i145.photobucket.com/albums/r...r_1280x676.jpg

I was lucky enough to fly with the Harvard Formation Team back in the late 80s. We had a "Zeke" which was a Harvard altered to look like a Zero for the film Tora Tora Tora which some may remember, and I flew it in the displays acting as No2 to Gary Newman when we got shot down by the "good guys". This delightful machine had the same engine but a HUGE 3 bladed, geared prop. The power available was awsome - you could do low level aeros all day and never lose energy. The only problem was that, for prop clearance, the UC oleos had to be pumped up rock hard and it would bounce like a ping pong ball. This meant a 3 pointer was essential. But, with the now very nose high ground attitude, it was pretty close to the stall (a sort of ground level coffin corner). As a result the private owners in its country of origin found it too much hassle which is how we got one. I would love to post a photo of it but I don,t have a web site, know anyone with one, or know of one where you can find it. Pity as it is a nice one taken from Gary's machine when we were half way round a loop. Can anybody tell me of a simple way to get it to here from my hard disk?

Send it to me as an e-mail attachment. I'll run it through my Photobucket account and post it here.

Snow S2D ag ship had the PW1340 with a two blade prop
Obviously a different prop it didnt howl.