Go Back  PPRuNe Forums > Misc. Forums > Aviation History and Nostalgia
Reload this Page >

Vulcan tried to escape from Wellesbourne, 16th Sept 2022

Aviation History and Nostalgia Whether working in aviation, retired, wannabee or just plain fascinated this forum welcomes all with a love of flight.

Vulcan tried to escape from Wellesbourne, 16th Sept 2022

Old 23rd Sep 2022, 07:48
  #101 (permalink)  
 
Join Date: May 2009
Location: uk
Posts: 154
Received 69 Likes on 32 Posts
Did they use full power??

I seem to remember that taking off with full power in a ‘light ‘ Vulcan was very exiting!
The acceleration was enormous and V rotate came up very quickly!

Below a certain AUW 85 % thrust was used for t/o.

Why were the air brakes not deployed ?

(Hazy memory recalls a Hunter going into the water at Gib doing brake checks- in the 70s ??)
mahogany bob is offline  
Old 23rd Sep 2022, 08:52
  #102 (permalink)  
 
Join Date: Nov 2007
Location: East Anglia
Age: 77
Posts: 202
Likes: 0
Received 2 Likes on 2 Posts
'(Hazy memory recalls a Hunter going into the water at Gib doing brake checks- in the 70s ??)'

Not quite right - he narrowly managed to avoid a dip in the harbour by selecting the undercarriage up on the emergency override system and remained on the runway edge - just.. He was indeed doing a brake check following a brake change. His first run was on the westerly runway followed by a return run on the easterly. He then decided to do one more run 'just to be sure' . Now those of you that know the Hunter will know that a) it did not have maxarets and b) it was notorious for brake fade. The outcome was thus no surprise! From memory this was in 1977 as the detachment finished after 12 years in 1978.
nipva is offline  
Old 23rd Sep 2022, 10:37
  #103 (permalink)  
 
Join Date: Jun 2002
Location: east ESSEX
Posts: 4,622
Received 64 Likes on 39 Posts
nip, the Hunter does have `maxarets`,or at least the ones I worked on at Halton,and later flew,had them....
sycamore is online now  
Old 23rd Sep 2022, 10:48
  #104 (permalink)  
 
Join Date: Nov 2007
Location: East Anglia
Age: 77
Posts: 202
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by sycamore
nip, the Hunter does have `maxarets`,or at least the ones I worked on at Halton,and later flew,had them....
You are of course quite correct. It is 41 years since I last flew that lovely aircraft. Despite some 800+ hours on it my memory let me down. Thank you for correcting it.
nipva is offline  
Old 23rd Sep 2022, 16:13
  #105 (permalink)  
 
Join Date: Jul 2022
Location: Up Narf
Posts: 403
Received 95 Likes on 49 Posts
Originally Posted by Krystal n chips
There's an interesting video on YT entitled Recovering Vulcan XM655 At Wellesbourne Airfield...it's about 20+mins long. I can't post a link because I'm a little uncertain as to copyright......however, there are some very "interesting " sub titles and commentary....."Green Flag " get a mention, as does...gas pipe...the weight is stated as 50 tons and those on board "get mentioned "...
Let us see how gash they were? Lots of mates with diggers that one would struggle to get from a hire company next day. No wonder they got it out so quickly.

Last edited by Diff Tail Shim; 23rd Sep 2022 at 16:26.
Diff Tail Shim is offline  
Old 23rd Sep 2022, 16:30
  #106 (permalink)  
 
Join Date: Jul 2022
Location: Up Narf
Posts: 403
Received 95 Likes on 49 Posts
Originally Posted by mahogany bob
Did they use full power??

I seem to remember that taking off with full power in a ‘light ‘ Vulcan was very exiting!
The acceleration was enormous and V rotate came up very quickly!

Below a certain AUW 85 % thrust was used for t/o.

Why were the air brakes not deployed ?

(Hazy memory recalls a Hunter going into the water at Gib doing brake checks- in the 70s ??)
I bet they did. Get the howl and the nose up. We do with XX741. But have more reliable speed sensing equipment in use. Our first test runs were 100 knots that was 125 first time. XX741 would have flown at that speed and weight..80 max now. Spoke to a regular jet car driver (and professional military pilot as day job) and he was not impressed by the show last weekend. Was unprofessional in his book.
Diff Tail Shim is offline  
Old 24th Sep 2022, 08:05
  #107 (permalink)  
 
Join Date: Apr 2003
Location: Lincolnshire
Age: 64
Posts: 2,277
Received 35 Likes on 14 Posts
XM655 has Olympus 301 engines, so with the enlarged air intakes doesn't produce the Vulcan howl that the 201 engined aircraft did.
ZH875 is online now  
Old 24th Sep 2022, 15:06
  #108 (permalink)  
 
Join Date: May 1999
Location: Quite near 'An aerodrome somewhere in England'
Posts: 26,783
Received 257 Likes on 103 Posts
Full power was always used in the Vulcan for take-off; a 4-eng go-around normally required 80% thrust; a 2-eng go-around required 93%. In a 200-ser aircraft anything more than 93% would cause the howl, particularly it the throttles were opened briskly at low speed....

300-ser aircraft were de-rated until the South Atlantic campaign, so didn't howl. The 'cruise' limit setting was then the same as the 'take-off' limit setting for 200-ser aircraft and 300-ser were always flown in 'cruise'. But those who had flown them years earlier when full power was available advised that the howl they made would shake Lincoln cathedral!

Anyway, '655 is now back on the pan with fully serviceable brakes and steering. At present there is no suggestion that there won't be any future taxy runs.

Last edited by BEagle; 24th Sep 2022 at 15:18.
BEagle is online now  
Old 24th Sep 2022, 19:32
  #109 (permalink)  
 
Join Date: Apr 2006
Location: Oxford
Age: 85
Posts: 456
Received 4 Likes on 4 Posts
Beagle, how right you are regarding 300-ser. aircraft in "cruise". The "cruise/take-off" limiting switch (yes -switch! ) was mounted on the throttle quadrant and wire locked in "cruise". I do remember, however, when giving displays overseas with friendly crew chiefs, that frequently the wire locking was "broken" and the switch was in the take-off position. Who was I to change it?!!! glad 655 is now "S", many happy memories! Bill
Bill Macgillivray is offline  
Old 25th Sep 2022, 14:24
  #110 (permalink)  
 
Join Date: Nov 2009
Location: UK
Posts: 382
Received 11 Likes on 4 Posts
Back where it should be - nothing obvious in the way of damage.


GrahamO is offline  
Old 25th Sep 2022, 15:36
  #111 (permalink)  
 
Join Date: May 2002
Location: UK
Posts: 1,194
Received 9 Likes on 6 Posts
Originally Posted by Bill Macgillivray
Beagle, how right you are regarding 300-ser. aircraft in "cruise". The "cruise/take-off" limiting switch (yes -switch! ) was mounted on the throttle quadrant and wire locked in "cruise". I do remember, however, when giving displays overseas with friendly crew chiefs, that frequently the wire locking was "broken" and the switch was in the take-off position. Who was I to change it?!!! glad 655 is now "S", many happy memories! Bill
I vaguely recall picking up a 300 series aircraft from St Athan and finding the governor switch in Takeoff. As it was ex-major all the role equipment had been removed and the ZFW was somewhere in 80s. I only vaguely recall the departure as it didn’t take long and everything happened extremely quickly! I do recall that an unusually large amount of up elevon was involved.

Happy days
YS

Last edited by Yellow Sun; 25th Sep 2022 at 16:46.
Yellow Sun is offline  
Old 25th Sep 2022, 16:25
  #112 (permalink)  
Thought police antagonist
 
Join Date: Jul 2003
Location: Where I always have been...firmly in the real world
Posts: 1,369
Received 86 Likes on 60 Posts
Originally Posted by GrahamO
Back where it should be - nothing obvious in the way of damage.

Well as that's a long distance shot, and, in all probability there isn't any damage, well to the aircraft at least, then you can't say for certain there's no damage until you jack the wheels and carry out a detailed close inspection and functional checks.

However, watch the arrival of the aircraft on YT at Wellesbourne and note the stopping distance along with the aircraft taxiing clear...now I don't know what the landing speed / weight would have been on the day, plus, it had five crew on board, but compare the safe arrival..... to the fast taxi event....
Krystal n chips is offline  
Old 25th Sep 2022, 17:12
  #113 (permalink)  
 
Join Date: Apr 2003
Location: Lincolnshire
Age: 64
Posts: 2,277
Received 35 Likes on 14 Posts
On arrival she was travelling fast enough to deploy the tail braking chute. Fast taxi could not use the chute. You're comparing apples and pears.
ZH875 is online now  
Old 30th Sep 2022, 14:15
  #114 (permalink)  
 
Join Date: Apr 2008
Location: South
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by GrahamO
Back where it should be - nothing obvious in the way of damage.
Apparently they've damaged an engine, which will need to be replaced.
hurn is offline  
Old 30th Sep 2022, 18:51
  #115 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,786
Received 196 Likes on 90 Posts
Originally Posted by hurn
Apparently they've damaged an engine, which will need to be replaced.
I'd have thought that 3-engined taxy runs might be a tad safer.
DaveReidUK is online now  
Old 30th Sep 2022, 19:16
  #116 (permalink)  
 
Join Date: Jun 2002
Location: east ESSEX
Posts: 4,622
Received 64 Likes on 39 Posts
DR,longer accel. distance to achieve speed........
sycamore is online now  
Old 30th Sep 2022, 21:10
  #117 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,786
Received 196 Likes on 90 Posts
Originally Posted by sycamore
DR,longer accel. distance to achieve speed........
In other words, lower speed for the same acceleration time.
DaveReidUK is online now  
Old 1st Oct 2022, 00:07
  #118 (permalink)  
 
Join Date: Apr 2008
Location: South
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DaveReidUK
I'd have thought that 3-engined taxy runs might be a tad safer.
Depends. A four engined taxi run at low speed would be safer than a 3 engined taxi run at high speed.
hurn is offline  
Old 1st Oct 2022, 06:30
  #119 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,786
Received 196 Likes on 90 Posts
Originally Posted by hurn
Depends. A four engined taxi run at low speed would be safer than a 3 engined taxi run at high speed.
I suspect that, whether or not they manage to restore 4 serviceable engines, the speed at which they perform taxi runs is going to be reviewed in the light of the incident.
DaveReidUK is online now  
Old 3rd Oct 2022, 21:07
  #120 (permalink)  
 
Join Date: Nov 2009
Location: UK
Posts: 382
Received 11 Likes on 4 Posts
Recovery video

GrahamO is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.