PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   ATC Issues (https://www.pprune.org/atc-issues-18/)
-   -   Like to PM a EGGP controller re drone in CTR. (https://www.pprune.org/atc-issues/570298-like-pm-eggp-controller-re-drone-ctr.html)

magpienja 7th November 2015 18:07

Like to PM a EGGP controller re drone in CTR.
 
Hi if any EGGP controllers are reading this could you PM please...its re drone use in the zone.

Gonzo 7th November 2015 20:50

If it's about you wanting to operate one, I suggest you contact EGGP ATC through more official channels.

magpienja 7th November 2015 21:21

No its about unauthorised use.

TCAS FAN 8th November 2015 08:04

ATC permission to operate in Class D airspace is only necessary if the drone has a weight more than 7 KG or more, ANO Article 166 (4) refers.

If you believe that the drone endangered another aircraft or the safety of persons on the ground report it to the police.

magpienja 8th November 2015 08:17

I see...I was under the impression it was a complete no no...many thanks.

TCAS FAN 9th November 2015 07:16

YouSaidBolt

As I mentioned

"If you believe that the drone endangered another aircraft or the safety of persons on the ground report it to the police."

Operating at 500 FT on a 1 mile final, irrespective of whether or not in a CTR, could constitute "endangering the safety of an aircraft" and thereby a contravention of ANO Article 137, which is a criminal offence. Therefore report it to the Police who will pursue the issue with the CAA.

magpienja 9th November 2015 17:37

Sounds like its all going to end in tears in the not to distant future.

zonoma 9th November 2015 20:02

TCAS FAN, I'm with YouSaidBolt here, your post is misleading. It sounds like you are assuming that every drone pilot is aware of exactly where they are in relation to CAS and final approach tracks, and would be able to determine themselves if flying in their area is safe or not. I think you needed to elaborate on your post giving far more detail of the rules and that contact with the relevant ATC is advisable to ensure safety to all.......


All times are GMT. The time now is 12:28.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.