Vertically split VFR circuits
Hi does anyone know of an airfield that operates VFR circuits on the same side but split vertically? E.g. One set of a/c at say 700 feet and another set at 1500 feet.
|
I don't know about that, but I remember doing a rather busy Tower at Aberdeen in the '70s (no Radar then), & looking towards Dyce & downwind right for 35, & seeing two light a/c obviously downwind & very close together, which APP hadn't told me about. I turned to the APP Procedural controller (sitting next to me ) & asked what the hell these two a/c were doing downwind in my circuit without being notified to me.
"Don't worry", he said, "they're separated, one's not above 1000 & the other's not below 1000" ! "Would you like to think that one through, again, xxx", I asked. But, I don't think that he got it. |
We have one in New Zealand. Christchurch Airport has an "interesting" mix of aircraft ranging from 777's to Piper Tomahawks. They have a parallel Grass and Seal runway to cater, Grass 02/20 has a circuit altitude of 900ft AMSL, Seal 02/20 has a circuit altitude of 1500ft AMSL, both on the same side. See AIP New Zealand look for Christchurch Aerodrome (1) & (2) under aerodrome charts
|
Vertically split VFR circuits
Benson. 500' for loads, 700 for grobs and 1000' for rotary.
|
in Switzerland at LSZL you have a circuit at 2000' fixed gear aircraft and one at 3'000 feet for the retractable gear aircraft :O
|
Farnborough; 1,200ft QNH up to 2730kg, 1700 ft above 2730kg.
|
Booker
Helis 750' Fixed wing 1000' |
It's also being discussed in one of the other forums on here.
|
Blackbushe:
Day: Light single-engined aircraft - 800 ft (QFE) Twin-engined and executive :rolleyes: aircraft - 1200 ft (QFE) Night: All aircraft - 1000 ft (QFE) Presumably all non-executive aircraft and three-holers, Herons etc have to do 800 ft circuits during daytime… And are there any single-engined aircraft which are not 'Light' ? |
All times are GMT. The time now is 23:08. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.