Hunter brakes

[toller]

Can anybody help me with information on the hunter's brake pads and discs with diagrams/ photos if possible?

[spanners123]

I have none of the info you asked for, however, I did work in the Tyre Bay, and used to replace the Hunter Brake pads, held in place by rivets. A very easy task.

Asbestos warning labels all over the packaging though, but maybe there is a new, safer material.

[NutLoose]

Try asking here, some of the Bruntingthorpe guys may be able to help out.

https://www.key.aero/forum/historic-aviation

[longer ron]

Hi Toller
There are some Hunter A.P's on this website - not sure if much info on the brakes as you might need to find a copy of the component A.P. for a detailed diagram/picture.

https://www.avialogs.com/aircraft-h/hawker/itemlist/category/436-hunter?start=0

From memory Hunter Brakes were similar to the later Canberras - Chrome plated solid Copper multi Ring type with Maxaret anti skid units.Every so many landings we had to adjust the brakes by removing the locking clips - winding the brake pistons in until touching the discs and then winding them back out (4 Flats ?) to give operating clearance and then refitting the locking clips.

[Speedywheels]

HHA Ltd. at Leeming will have the knowledge. Contact them here and hopefully they are willing to assist

Hawker Hunter Aviation (https://hunterteam.com/contact-us/)