PDA

View Full Version : A109SP gen load question


chr
6th Sep 2021, 08:18
Hello

one more question regarding 109SP

during starting right engine first GEN LOAD on that engine after start is much lower than when starting left engine first .
On right most of the times it's on green range but on left is always on red , of course decreasing gradually but slowly , it need about 45-50 sec to lower down to green .

Is that all right and it's because of electric system design or load should be the same no matter which one is going to start first ? If that'd not normal should I be worried about left GEN condition ?

Regards