PDA

View Full Version : Multi/IR Renewal


tinmouse
8th Mar 2016, 14:01
Hi all,

Can anyone tell me where I can find out the minium hours to renew my UK CAA Multi/IR rating.
Even if you can tell me where I can find the info on the CAA site. Impossible to find as usuall. I sent a mail but they usually take weeks to come back to me.

My Multi IR expired on the 12/04/2014

Thanks in advance!!

Mustapha Cuppa
8th Mar 2016, 14:18
From the AMC/GM to Part-FCL:

AMC1 FCL.625(c) IR — Validity, revalidation and renewal

RENEWAL OF INSTRUMENT RATING: REFRESHER TRAINING

(a) Paragraph (b)(1) of FCL.740 determines that if the instrument rating has lapsed, the applicant shall go through refresher training at an ATO, to reach the level of proficiency needed to pass the instrument element of the skill test prescribed in Appendix 9 to Part-FCL. The amount of refresher training needed should be determined on a case-by-case basis by the ATO, taking into account the following factors:

(1) the experience of the applicant. To determine this, the ATO should evaluate the pilot’s log book, and, if necessary, conduct a test in an FSTD.

(2) the amount of time lapsed since the expiry of the validity period of the rating. The amount of training needed to reach the desired level of proficiency should increase with the time lapsed. In some cases, after evaluating the pilot, and when the time lapsed is very limited (less than 3 months), the ATO may even determine that no further refresher training is necessary. The following may be taken as guidance when determining the needs of the applicant:

(i) expiry for a period shorter than 3 months: no supplementary requirements;

(ii) expiry for longer than 3 months but shorter than 1 year: a minimum of one training session;

(iii) expiry for longer than 1 year but shorter than 7 years: a minimum of three training sessions;

(iv) expiry for longer than 7 years: the applicant should undergo the full training course for the issue of the IR.

(b) Once the ATO has determined the needs of the applicant, it should develop an individual training programme, which should be based on the initial training for the issue of instrument ratings and focus on the aspects where the applicant has shown the greatest needs.

(c) After successful completion of the training, the ATO should give a certificate to the applicant, to be submitted to the competent authority when applying for the renewal.

And:

AMC1 FCL.740(b)(1) Validity and renewal of class and type ratings

RENEWAL OF CLASS AND TYPE RATINGS: REFRESHER TRAINING

(a) Paragraph (b)(1) of FCL.740 determines that if a class or type rating has lapsed, the applicant shall take refresher training at an ATO. The objective of the training is to reach the level of proficiency necessary to safely operate the relevant type or class of aircraft. The amount of refresher training needed should be determined on a case-by-case basis by the ATO, taking into account the following factors:

(1) the experience of the applicant. To determine this, the ATO should evaluate the pilot’s log book, and, if necessary, conduct a test in an FSTD;

(2) the complexity of the aircraft;

(3) the amount of time lapsed since the expiry of the validity period of the rating. The amount of training needed to reach the desired level of proficiency should increase with the time lapsed. In some cases, after evaluating the pilot, and when the time lapsed is very limited (less than 3 months), the ATO may even determine that no further refresher training is necessary. When determining the needs of the pilot, the following items can be taken into consideration:

(i) expiry shorter than 3 months: no supplementary requirements;

(ii) expiry longer than 3 months but shorter than 1 year: a minimum of two training sessions;

(iii) expiry longer than 1 year but shorter than 3 years: a minimum of three training sessions in which the most important malfunctions in the available systems are covered;

(iv) expiry longer than 3 years: the applicant should again undergo the training required for the initial issue of the rating or, in case of helicopter, the training required for the ‘additional type issue’, according to other valid ratings held.

(b) Once the ATO has determined the needs of the applicant, it should develop an individual training programme that should be based on the initial training for the issue of the rating and focus on the aspects where the applicant has shown the greatest needs.

(c) After successful completion of the training, the ATO should give a certificate, or other documental evidence that the training has been successfully achieved to the applicant, to be submitted to the competent authority when applying for the renewal. The certificate or documental evidence needs to contain a description of the training programme.

As an aside, can anyone spot EASA's mistake within the above?

tinmouse
8th Mar 2016, 15:08
Thanks Mustapha!

At last somewhere I can find facts. I spoke to the CAA, they ware not really sure about it. But you where. Schools are telling me about minumum hours for training sessions way above what EASA say.
It's a mine field out there, I just can't find anyone who's honest in this game.


Thanks again!

Star1101
21st Mar 2016, 19:43
I have an expired JAA ATPL and am looking at doing the Multi IR on a B737 simulator from a current ICAO ATPL and transfer a B737 rating having the 500 hours on type to the EASA ATPL.
Contacted the UK CAA about that and they sound OK about going right into a sim check for it only to find an ATO willing to do it. I would appreciate any information from someone who has done it.