C525 - Cockpit panel upgrade

[TBM700]

Hello,

Considering the cockpit panel of the first C525's here come the time to think about rebuilding our.
I've read a lot about G1000.
What kind of other solutions exist on the market ?
Any feedback ?

Thx +++

[McDoo]

The GTN750 is a pretty cost effective option but you will probably want to back it up with something you can actually program a holding pattern into!
If you want you can combine it with the G500 PFD/MFD set up - still cheaper than G1000 I believe.

[TBM700]

Thank you McDoo, I see this kind of thing....
CITATION JET AVIONICS & COCKPIT UPGRADES (http://www.sijet.com/citation-jet-avionics)
http://www.jettechllc.net

[McDoo]

Thank you McDoo, I see this kind of thing....
CITATION JET AVIONICS & COCKPIT UPGRADES (http://www.sijet.com/citation-jet-avionics)
JETTECH, LLC - Affordable Aircraft Systems Solutions (http://www.jettechllc.net)

That's the kind of thing. GTN750 is good but the touch screen is a bit difficult to use in turbulence. As I mentioned you cannot programme a hold on to it which seems crazy.

As usual it depends on your budget but combined with a Jepp Chartview subscription it's a pretty useful set up

Much more detail on Garmin's website including a downloadable GTN750 trainer.

[TBM700]

Thx, I'll investigate further.