PDA

View Full Version : Conway data plate missing from Newquay engine


Jhieminga
9th May 2015, 17:44
The situation around ZA148 at Newquay is currently in a transitional state. Sadly, while clearing up around the site, the staff discovered that the data plate from the Conway engine that was on display (ex no.1 from ZA148) has gone missing. It may have been gone for a few weeks or days as it is unclear when it was last seen. It is probably gone for good but even so, could you keep an eye out for the plate shown in the photo below? Thanks!

(photos by Andy Roselli and Chris Williams)
https://scontent-ams.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1901393_999824943362287_6715836391320124624_n.jpg?oh=3301caf 405fbadeca43171dd40758745&oe=55CFB2AB
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/11245476_999825533362228_2818761381044582228_n.jpg?oh=db4a47 05903e62543ba0618cc5ad2669&oe=55C82662&__gda__=1438627539_b6fd1b935f722d911d07915a87775956
I hope the photos above do turn up in the post... if not, see here: ZA148 - RR Conway Engine Plate missing - A Little VC10derness (http://www.vc10.net/forum/viewtopic.php?f=4&t=1097)