PDA

View Full Version : B777 door safety nets


going down-under
8th Apr 2015, 19:45
Hi everyone,


Does anyone know (& use) a P/N for B777 cabin door safety nets?
I mean the nets that will prevent you (catch you) from falling out an open door. Often used in maintenance or in warm environments to leave doors open.


I know of them (&used) on B737/767&747 but I can't find them for a B777.
I have found nets that will prevent you from getting close to an open door, but they're not certified to hold a person in.

Tolsti
9th Apr 2015, 09:19
http://www.boeing.com/commercial/aeromagazine/articles/qtr_4_07/AERO_Q407_article4.pdf


Looks like PRE 131W1000

Jet II
14th Apr 2015, 10:07
In our Tools and Equipment manual it is:

PART NUMBER: J52009-55, -103, -104, -105, -106, -107, -108, -109


The J52009-55, -103, -104, -105, -106, -107, -108 or -109 (preferred)
barriers are used on all 777 airplanes.
J52009 barriers are used to prevent persons from accidentally falling from
passenger entry door opening when a doors is open or removed.
J52009-109 barrier is used on all passenger entry doors on all 777
airplanes.
J52009-103 barrier is used for the left side No. 1 entry door on all 777
airplanes.
J52009-104 barrier is used for the right side No. 1 entry door on all 777
airplanes.
J52009-105 barrier is used for the left side No. 2 and 3 entry doors on the
777-200 and on left side No. 2 and 4 entry doors on the 777-300.
J52009-106 barrier is used for the right side No. 2 and 3 entry doors on
the 777-200 and on right side No. 2 and 4 entry doors on the 777-300.
J52009-107 barrier is used for the left side No. 4 entry door on the
777-200 and for the left side No. 5 entry door on the 777-300.
J52009-108 barrier is used for the right side No. 4 entry door on the
777-200 and for the right side No. 5 entry door on the 777-300.
J52009-55 barrier is used for the left and right side No. 3 entry door on the
777-300.

going down-under
19th Apr 2015, 03:43
Sorry guys, haven't been able to check this topic for a while...


Thanks a million for the input!!!
I'll see if I can find me some.


Thanks