UK CAA B2 Work experience

[shumway76]

I currently hold EASA B2 with limitations 2 to 6 (I was from the old UK BCAR Sect L "XE").

I have already completed the required modules to remove my limitations, which is basically Instruments, Autopilots (fixed & heli), Radio Nav & Comm stuff.
My question is, as per CAA UK I need minimum of 6 months work experience.

But from you guys who have done this before, how much of work experience do you guys write in your logbook?
Just enough 6 months experience or a lot more?
What about the tasks - must it have a combination of inspections, removal / installation, test?
What about ATA chapters? Must it be the same amount of work for each ATA (in my case 22, 23, 25, 31, 34 etc) or based on the "size" of the ATA - 'smaller' ATA chapters you write less than the 'bigger' ATA chapters?

Cheers!

[RotaryWingB2]

More is always better.

[TinyTim2]

More is always better , but remember to follow a CAP741 sort of structure . Organise by ATA and include everything . The more professional it looks the more likely it will be accepted . Make sure everything is signed by EASA LAE's and in a 145 approved environment , line or base is not important but all aspects must be covered ....

Good luck !