PDA

View Full Version : A320 brake temp


MD83FO
4th Nov 2010, 05:44
I've gonne thru the various discussions, but is it clear that brake energy

certification (RTOW) was achieved using indicated brake temp of 150c ?

Hence not to be exceeded when rwy limited?

thank you.

rudderrudderrat
4th Nov 2010, 14:42
The only limitation in my FCOM is to delay take off until the brakes are below 300 degs with brake fans off, or indicating below 150 degs with the fans on (basically the same actual temp).

HazelNuts39
4th Nov 2010, 16:05
Hence not to be exceeded when rwy limited?The limit is primarily to guard against the brakes getting overheated in an RTO. That applies whether you are rwy limited or not.

regards,
HN39

767-300ER
4th Nov 2010, 21:48
The limit is primarily to guard against the brakes getting overheated in an RTO. That applies whether you are rwy limited or not.

Are you certain about that?

I understood(and was told) the limit had to do with that fact that there are no wheel well fire detectors and ensuring that the temperature was below 300˚ reduced the risk that hot brakes could ignite leaking hydraulic fluid.

Dunbar
4th Nov 2010, 21:50
...Is the correct answer! Flashpoint of skydrol etc:D

HazelNuts39
4th Nov 2010, 22:26
Maybe there is more than just one reason. How about the fusible wheel plugs? The main point I wanted to make is that the limit applies independent of rwy length.