View Full Version : 3.5mm male to male adapter
Screwballs
14th May 2010, 11:43
Hi there,
I have searched t'internet and have seen it before but have lost the link. I'm hoping someone on here might guide me to it. I'm trying to find a 3.5mm male to male adapter without the cable part. ie just the jacks connected by a bit of plastic so in total length about 3".
Any ideas?
Thanks.
Torque2
14th May 2010, 12:43
This any good 3.5 MM (1/8" Mini Stereo) , 1/4" and 2.5MM Plugs and Adapters - 1 Inch 3.5MM (Mini Stereo) Male-Male Coupler Steel (http://www.trianglecables.com/mini-cp-mm.html)
green granite
14th May 2010, 13:19
Alternately buy two plugs and a piece of suitable wire and solder them up yourself.
tony draper
14th May 2010, 15:41
Audio? base band no need for even solder, chop orf plugs strip ends twist together then a good application of insulation tape, keep the twisted ends separated though,good enough for pit work, fed the radio progs to thousands of homes thusly when I worked for Rediffusuion.
:rolleyes:
Screwballs
14th May 2010, 15:42
Exactly that!
Thank you very much!
Torque2
14th May 2010, 20:33
You're welcome. :ok:
nitro rig driver
15th May 2010, 06:59
if your in the UK try Maplins ,they got everything and more
Saab Dastard
15th May 2010, 10:13
try Maplins, they got everything and more
That should of course read "everything FOR more"!
I do find that they are usually more expensive than online alternatives. I rarely buy from Maplins these days.
SD
green granite
15th May 2010, 11:15
Cricklewood Electronics are a good source for stuff on line or pop in if you're in the area.
Hugh Spencer
15th May 2010, 12:52
Try Keene. 3.5 mm Stereo jack socket Back to Back coupler 99p