Spares required

[hugo_visser]

Hi all, i am new to the forum so please move my tread if it is wrongly placed, i need main rotor blades, tail rotor blades, tail rotor head and gearbox for a alouette 3 that i have just bought. I stay in Benoni. is the new owner of Petit airfield ( FARA ), fly a alouette 2 and Cessna C 182. Hugo. 0825610443.

[TRC]

Have you tried the Irish Air Corps, they are replacing their Al.III's I think.

They might have some surplus spares that they don't need.

Telephone - 01 804 2149 / 2144 :: Fax - 01 8042412

[Rotorhead412]

All the air corps stuff is gone gone gone...!

Best thing you could do i go direct to the manufacters...

Much easier to get the maintenance certs that way too!!!

Good luck tracking down such though, wish i could help u further!

[EESDL]

Try asking Jet Systems at Le Mans - Their engineer (Jacque?)is very knowledgeable on that topic and should be able to point you in right direction.

Pays de la Loire (Le Mans) : [email protected]
adress :
JET SYSTEMS
Aérodrome Le Mans Arnage
72100 Le Mans
tel : + 33 2 43 72 07 70
fax : + 33 2 43 72 36 11
Technical service : [email protected]
tel : + 33 2 43 72 07 70
Webmaster : [email protected]
tel : + 33 2 43 72 07 70

[bellsux]

Also try to find a supplier that has access to Parts Base or similar websites, any good spare parts broker can help you. If you do find a good broker make sure that they do supply you with a least 3 different quotes from different suppliers, you will pay a percentage mark up on the parts but a good broker should get you a better price than you could normally.

[enstrompilot]

hi

are you still looking ?

I have some parts as some a the same as the AL2

I have AL3 MRGB, Mast Etc

also

I have a contact in Asia where I saw 2 x AL3's for sale and a huge stock of AL3 spares

let me know what your looking for, I may be able to help

good luck

Ian

[email protected]