PDA

View Full Version : Cessna 172N-FUEL TANK DIMENSIONS


sycamore
4th Sep 2008, 18:01
Anyone able to give me the dimensions of a C172 N wing tank,and also wing dihedral.I realise it probably has a curved top surface,but best figures would be appreciated,as I don`t have access to one at home..MANY THANKS..

N629CC
5th Sep 2008, 11:32
ON THE TOP OF THE WINGS THERE IS A REMOVABLE SKIN.THE TANK HAS THE SAME SIZE + OR _ A COUPLE OF INCHES...i JUST REMOVED THESE SKINS FEW DAYS AGO TO CHANGE THE SEALS UNDERNEATH

HOPE THIS HELPS

KENNETH

Wakarikid
5th Sep 2008, 18:10
Why do you need to know the dihedral.
This is set up with wash out during wing build or rebuild on a jig.
If I remember correctly (its be over 25years that I last rebuild a 172 wing ) the dihedral and wash out starts outboard of the wing strut. The info should be either in the SRM or Flight manual . Not sure now its be to long. The only adjust you have is at the rear wing to fuse attachment bush .
With regards to your fuel tanks, why do you want the size, If the P/no is not correct, its the wrong tank !

NutLoose
8th Sep 2008, 16:06
Washout is 3 degrees 0 minutes measured outboard of the strut

midacman
21st Sep 2008, 04:48
Standard tanks or long range?