PDA

View Full Version : A300 and A310 Parts Interchangability


airbirduk
13th Jun 2008, 14:37
If I wanted to find out about what parts where interchangeable between an A300 and an A310 is there a quick way to do it? Are any parts interchangeable between these two aircraft types?

Vortechs Jenerator
16th Jun 2008, 10:08
Only by checking the part numbers from the donor aircraft were listed as acceptable items for a given effectivity on the aircraft to be fitted too

nitro rig driver
16th Jun 2008, 10:56
The IPC is your (only) bible

Bus429
17th Jun 2008, 06:34
Nitro is absolutely correct.

"Instructions for continuing airworthiness" such as IPCs, AMMs, SRM, SPM, SWPM (Standard Practices and SRMs have part numbers in them, too), SBs and ADs are the only sources.

itwilldoatrip
18th Jun 2008, 15:04
Apart from Flaps and wing fence all should be the same

SeldomFixit
19th Jun 2008, 04:16
Not so - mod status, SB incorporation etc etc etc all may preclude fitment across fleets.
As stated, Manufacturer's publications are your ONLY source.

itwilldoatrip
19th Jun 2008, 05:19
I think he is talking about interchangeability. Chuck the part no in Air Nav and it will tell you.

Bus429
19th Jun 2008, 07:14
Getting a bit heavy this! Itwilldoatrip - I'll be in the sandpit at the weekend. Are you still flying the models?

itwilldoatrip
19th Jun 2008, 14:06
How heavy pretty simple really for us thats been in the game a while eh. Gone onto heli's now as well.