PDA

View Full Version : Any Ex Ansett LAMEs Looking For Work May Be Interested?


lame
23rd Mar 2004, 06:59
Licensed Approved Maintenance Engineers

About Gulf Air :

Gulf Air has an impressive history with over 50 years of airline experience, offering the best connections in the Gulf region. Gulf Air, the national airline of Bahrain, Oman and the United Arab Emirates carries over 6 million passengers each year to more than 45 destinations worldwide in one of the youngest fleets in the industry.

We are currently recruiting for Licensed Approved Maintenance Engineers (appearance) to be based out of Abu Dhabi UAE with the following profile

Main Objectives:

You will make professional technical decision relating to diagnosis of defective areas/parts in the aircraft. The position requires a highly technical expertise to maintain Company aircraft in accordance with the approved maintenance schedule using approved methods and procedures.

Main Duties and Responsibilities:
Your duties will be:

To be responsible for up keeping of the workshop, bonded store, office to ensure a clean, tidy and serviceable condition.

To maintain Company aircraft in accordance with the approved maintenance schedule using approved methodas and procedures.

To carry out all routine and non-routine and maintenanace within scope of the approval.

To travel when required for recovery of aircraft during an aircraft on ground situation and as needed at other stations.

To be responsible for keeping the station up-to-date technical publications in accordance with regularized standards.

To deputize for the supervisor or Station Maintenance Manager when the need arises.

To ensure accurate, timely debriefs of stations messages to Maintenance Control Center on aircraft departure, technical daily, defect rectification, ADDs/MDDs raised and ETS.

Responsible for keeping the station "impress" up-to-date and following on materials for replenishment of any materials shortages.


Qualifications and Experiences:

You must be an holder of a valid ICAO annex one License.

You must have a minimum of 5 years experience on wide body aircraft and out of which a minimum of 2 years as a certifyied Engineer on one or more of the following A/C types:

B767( CF6 eng.), A320 (CFM56 or 2500 eng.), A330 (Trent 700 or PW4168 or CF6 eng.), A340, A300, B77 and B747

The Remuneration Package:

An attractive tax free package will be offered to the right candidate.

PS. Closes 30 March 2004.

Apply at http://www.sniperhire.net/gulfair/jobdetails.asp

The Enema Bandit
23rd Mar 2004, 07:54
Sniperhire??? BYO Koran.