|
Originally Posted by atakacs
(Post 10043020)
Firstly it was president Chirac.
Secondly from their position they could obviously not see what caused the tire to shred. All there was too see was a dangerously off track burning Concorde passing uncomfortably close |
Originally Posted by Buster15
(Post 10040063)
Fraser. Page 155 of the BEA Report states that (words to the effect) the analysis carried out shows that the absence of the Spacer had no affect on the aircraft crash.
|
Originally Posted by Shaggy Sheep Driver
(Post 10043623)
The name of the president is irrelevant. Pulse 1 did not say the 747 crew saw 'what caused the tyre to shred' he said they saw fire BEFORE the Concorde reached the metal strip.
Which should tell one something about how unbiased the report was to start with... |
Originally Posted by Shaggy Sheep Driver
(Post 10043623)
The name of the president is irrelevant. Pulse 1 did not say the 747 crew saw 'what caused the tyre to shred' he said they saw fire BEFORE the Concorde reached the metal strip.
I prefer to rely on facts rather than conspiracy theories or maybe it was JFK ? |
Originally Posted by Buster15
(Post 10043919)
You have read the report I take it. Assuming that you have you will have noted that it was concluded that the tyre was CUT (not worn away) and that the cut matched the shape of the metal strip.
I prefer to rely on facts rather than conspiracy theories or maybe it was JFK ? You could try asking the guy that actually posted it. He's called Pulse 1. I merely pointed out that atacacs had not read what Pulse 1 actually posted. Or what I posted either - see my post below. Do keep up.
Originally Posted by atakacs
(Post 10043794)
How could they conceivably affirm that ? Do you have any source ? And if so how credible is their assertion ? They were 1+ km where this happened !
Ask the guy who posted it, not me. You're as bad as Buster in not reading who posted what. |
| All times are GMT. The time now is 14:25. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.