PPRuNe Forums - View Single Post - Tailboom strike by main rotor
View Single Post
Old 18th Oct 2022, 14:41
  #30 (permalink)  
JohnDixson
 
Join Date: Mar 2007
Location: Hobe Sound, Florida
Posts: 950
Received 33 Likes on 27 Posts
The new composite rotor with anhedral tip was tested in the 1990’s, and yes the word “ anhedral “ means that an outboard tip was tilted downward a few inches. The hover performance improvement was fairly substantial. So sure, if you hamfisted the landing, and have the stick near or on the aft stick stop while dropping the collective to hit the ground with some vertical rate, you’d have less clearance and are asking for trouble. Not to mention that if you are hot coming in, the right way to handle it is to put the tail wheel on the ground and use the rotor to kill your speed*. I should note here that for those reading that have no UH-60 background, there is a mechanical control mixing unit installed. One of several functions relates to limiting aft cyclic range with increasingly lower collective position. Can one defeat the built in protection? There were a couple of instances with the original blades in the US Army Usually related to something else going on ( my personal but limited knowledge ), but the normal ( incl.maybe a bit hotter than normal ) tactical landing isn’t a problem.
*in fact, this is the reason why there is a tail wheel on the ship in the first place.

Last edited by JohnDixson; 18th Oct 2022 at 15:14. Reason: Typo
JohnDixson is offline  
The following 2 users liked this post by JohnDixson: