Originally Posted by
dixi188
using a 7/16 inch socket on a 1/4 inch ratchet !!!!
You could have used an 11mm one if you prefer to stay half metric wise.
Thank god the drive side hasn't changed.
One of the few small ones that are close enough for most purposes. I seem to recall that it works either way round.
= 11.125mm or if you prefer 11 1/8 mm
I have not checked but I seem to recall that 5/16 is v close to 8mm
Then you don't get a decent hit until 19mm and 3/4 which are also interchangeable.
I don't recommend this for work on Aircraft but it's OK for plumbing.