Old 25th Dec 2018, 20:07
  #6 (permalink)  
Join Date: Jan 2008
Location: Reading, UK
Posts: 10,669
Originally Posted by CONSO View Post
Sure sounds like somehow, the AOA indicator was installed in the wrong set of holes ( clocked ) relative to the correct set. " If it doesn't FIT - FORCE IT ' assmbly method
According to the Preliminary Report, the AoA values from the suspect sensor were 20 degrees adrift.

If you tried to fit the sensor offset by 20 degrees, none of the attachment screws would pick up on the captive nuts, so that sounds highly unlikely.
DaveReidUK is online now