Perf B LDR query for EASA standard
Thread Starter
Join Date: Jun 1999
Location: UK
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Perf B LDR query for EASA standard
Performance has never been my strong point so would rather embarrass myself here rather than company.
If our AFM Landing field length required chart has a 60% factor included but our SOP's state that for EASA we must obtain this performance within 70% of LDA a reduced LDA is needed.
It goes on with an example and factors the chart result x 0.857 and is therefore less as stated. LDR from graph 3900ft=3342ft LDR
Reading it that way I would have said we needed to increase by 1.16?
Am I misreading this or getting LDA's and LDR's crossed?
Any guidance appreciated.
Cheers
SS
If our AFM Landing field length required chart has a 60% factor included but our SOP's state that for EASA we must obtain this performance within 70% of LDA a reduced LDA is needed.
It goes on with an example and factors the chart result x 0.857 and is therefore less as stated. LDR from graph 3900ft=3342ft LDR
Reading it that way I would have said we needed to increase by 1.16?
Am I misreading this or getting LDA's and LDR's crossed?
Any guidance appreciated.
Cheers
SS