Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Minima - EU vs JAR-OPS

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Minima - EU vs JAR-OPS

Thread Tools
 
Search this Thread
 
Old 4th Jan 2013, 19:15
  #1 (permalink)  
Thread Starter
 
Join Date: Nov 2005
Location: Norway
Age: 42
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Minima - EU vs JAR-OPS

When the "howto" for calculating and publishing the required visibility or RVR were changed from JAR-OPS to EU-OPS. (1)Did the operating minimas increase, stay the same, or did they decrease? Taking into account the difference between visibility and RVR...

My operator uses EU-OPS charts (Jeppesen, Navtech), although we are exempt from EU-OPS (mil operator). With no written consent to use CMV (so far), and very few airports in this country reporting RVR, we are in unnecessary trouble if the met visibility value decreases below the RVR value published. Especially when trying to find a suitable alternate (using operating minima (ceil+rvr) plus a buffer as planning minima).

(2) What other possibilities are there in terms of "rules"/publications for establishing operating minima in addition to EU-OPS and the old JAR-OPS? I saw a briefing bulletin from Jeppesen which states that Jeppesen will be able to publish required visibility based on JAR-OPS, on customers' requests.

Any other comments or concerns? (Yes, I know EASA-OPS is coming. No, I do not know what it will bring of surprises).

Last edited by seilfly; 4th Jan 2013 at 19:16.
seilfly is offline  
Old 4th Jan 2013, 19:28
  #2 (permalink)  
Thread Starter
 
Join Date: Nov 2005
Location: Norway
Age: 42
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Found out I had some very old approach plates from Navtech... an airport published in accordance with JAR-OPS in 2009 has the same values, stated in RVR, as it has today (in Jeppesen) published in accordance with EU-OPS.
seilfly is offline  
Old 5th Jan 2013, 18:38
  #3 (permalink)  
 
Join Date: Mar 2011
Location: engineer at large
Posts: 1,409
Likes: 0
Received 0 Likes on 0 Posts
Vis from FAA land...



FlightPathOBN is offline  
Old 7th Jan 2013, 14:26
  #4 (permalink)  
 
Join Date: May 2006
Location: ITALY
Age: 42
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
You can still take the the DH/MDH minima from the euops charts and self calcolate the required visibility jar ops with the system minima table.
mgTF is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.